International Journal Papers

• Senturk, B.U., Guler, H.G., Baykal, C., (2023). “Numerical simulation of scour at the rear side of a coastal revetment”, Ocean Engineering, 275, 114092, doi:10.1016/j.oceaneng.2023.114092.
• Demircioglu, O., Cicek, M.O., Doganay, D., Gazaloglu, G., Baykal, C., Cinar, S., Unalan, H.E., (2023). “Triboelectric nanogenerators for blue energy harvesting in simulated wave conditions”, Nano Energy, 107, 108157, doi:10.1016/j.nanoen.2022.108157.
• Goral, K.D., Guler, H.G., Baykal, C., Ahmet Cevdet Yalciner, A.C., (2021). “An experimental study on the motion of solid spheres under solitary wave attack”, Ocean Engineering, 240, 109946, doi:10.1016/j.oceaneng.2021.109946
• Kisacik, D., Ozyurt, G.T., Baykal, C., (2019). “Stilling wave basins for overtopping reduction at an urban vertical seawall – The Kordon seawall at Izmir”, Ocean Engineering, 185, 82–99, doi:10.1016/j.oceaneng.2019.05.033.
• Guler, H.G. Baykal, C., Arikawa, T., Yalciner, A.C. (2018). “Numerical assessment of tsunami attack on a rubble mound breakwater using OpenFOAM®”, Applied Ocean Research, 72, 76-9, doi:10.1016/j.apor.2018.01.005.
• Larsen, B. E., Fuhrman, D. R., Baykal, C., Sumer, B. M. (2017). “Tsunami-induced scour around monopile foundations” Coastal Eng. 129, 36-49, doi: 10.1016/j.coastaleng.2017.08.002.
• Baykal, C., Sumer, B. M., Fuhrman, D. R., Jacobsen, N. G. and Fredsøe, J. (2017). “Numerical simulation of scour and backfilling processes around a circular pile in waves.” Coastal Eng. 122, 87-107, doi:10.1016/j.coastaleng.2017.01.004.
• Harbitz, C. B. and Nakamura, Y. and Arikawa, T. and Baykal, C. and Dogan, G. G. and Frauenfelder, R. and Glimsdal, S. and Guler, H. G. and Issler, D. and Kaiser, G. and Kânoǧlu, U. and Kisacik, D. and Kortenhaus, A. and Løvholt, F. and Maruyama, Y. and Sassa, S. and Sharghivand, N. and Strusinska-Correia, A. and Tarakcioglu, G. O. and Yalciner, A. C. (2017). “Risk assessment and design of prevention structures for enhanced tsunami disaster resilience (RAPSODI) – Euro-Japan collaboration”, Coastal Engineering Journal, doi:10.1142/S057856341640012X.
• Boero, F., Foglini, F., Fraschetti, S., Goriup, P., Macpherson, E., Planes, S., Soukissian, T., and the CoCoNet Consortium, (2016). “CoCoNet: Towards coast to coast networks of marine protected areas (from the shore to the high and deep sea), coupled with sea-based wind energy potential”, SCIRES-IT, Scientific RESearch and Information Technology, Vol 6, Supplement (2016), 1-95, doi:10.2423/i22394303v6Spl
• Baykal, C., Fuhrman, D. R., Sumer, B. M., Jacobsen, N. G. and Fredsøe, J. (2015). “Numerical investigation of flow and scour around a vertical circular cylinder.” Trans. R. Soc. A, 20140104. doi:10.1098/rsta.2014.0104
• Fuhrman, D. R., Baykal, C., Sumer, B. M., Jacobsen, N. G. and Fredsøe, J. (2014). Numerical simulation of wave-induced scour and backfilling processes beneath submarine pipelines. Coastal Engineering, Vol.94, pp.10–22. doi:10.1016/j.coastaleng.2014.08.009
• Baykal, C. (2014). “Development of A Two-Dimensional Beach Evolution Model”, Turkish J. Earth Sciences, 23: 215-231. doi:10.3906/yer-1302-1
• Baykal, C., Ergin, A., and Güler, I. (2014). ”Two-Dimensional Depth-Averaged Beach Evolution Modeling: Case Study of the Kızılırmak River Mouth, Turkey.” J. Waterway, Port, Coastal, Ocean Eng., 140(3), 05014001. doi:10.1061/(ASCE)WW.1943-5460.0000243

National Journal Papers

• Guler, H.G., Ozyurt, G.T., Baykal, C., (2020). “Ortalama Su Seviyesi Değişimlerinin Taş Dolgu Kıyı Koruma Yapılarının Tasarımına ve Performansına Etkisi”, İMO Teknik Dergi, 31(3), doi:10.18400/tekderg.448489

International Conferences Presentations/Proceedings

• Çiçek, Y.A., Dogan, G.G.B., Guler, I., Baykal, C., Yalçıner, A.C., (2022). “Hydrodynamical Comparison of Nami Dance and XBeach Non-Hydrostatic on a Benchmark Study”, 14^th Int. Conf. on Hydroscience & Engineering, May 26-27, 2022, Izmir, Turkey.
• Karakas, K. and Baykal, C. (2019). “Flow and Scour Around Round Head Vertical Wall Breakwater Under Random Waves”, 15th UK Young Coastal Scientists and Engineers Conference, 14th-15th May 2019, Glasgow, Scotland, UK.
• Guler, H.G., Liu, X., Jensen, B., Tomaselli, P.D., Baykal, C., Arikawa, T., Yalciner, A.C., (2018), “A New Numerical Solver For Simulating Porous Media Flow Based On Immersed Boundary Method”, AGU Fall Meeting 10-14 December 2018, Washington D.C., USA.
• Ozyurt, G.T., Baykal, C., Bezazoglu, S., Atak, D., Ergin, A., Guler, I., (2018), “A Case Study On Performance Of Reshaping Berm Breakwaters: Ordu Giresun International Airport, Turkey”, 36th Int. Conf. on Coastal Eng., 29 July – 03 Aug. 2018, Baltimore, Maryland, USA.
• Baykal, C., Ozyurt, G.T., Isik, E., (2018), “Harbor Agitation Due To Offshore Ship Waves Using Swash: A Case Study Of Kumkapi Yacht Park, Istanbul”, 36th Int. Conf. on Coastal Eng., 29 July – 03 Aug. 2018, Baltimore, Maryland, USA.
• Kisacik, D., Ozyurt, G.T., Baykal, C., Kaboglu, G., (2018), “Vertical Sea Wall Crest Modifications For Overtopping”, 36th Int. Conf. on Coastal Eng., 29 July – 03 Aug. 2018, Baltimore, Maryland, USA.
• Guler, H.G., Arikawa, T., Baykal, C., Goral, K.D., Yalciner, A.C., (2018), “Motion Of Solid Spheres Under Solitary Wave Attack: Physical And Numerical Modeling”, 36th Int. Conf. on Coastal Eng., 29 July – 03 Aug. 2018, Baltimore, Maryland, USA.
• Cinar, G.E., Guler, H.G., Arikawa, T., Baykal, C., Yalciner, A.C., (2018), “Comparison Of Numerical Wave Tanks With Various Turbulence Models In Application To Long Wave Motion And Its Interaction With A Vertical Wall”, 36th Int. Conf. on Coastal Eng., 29 July – 03 Aug. 2018, Baltimore, Maryland, USA.
• Baykal, C., Özyurt, G.T., Işık, E., Güler, H.G., Aydın, D.C., Çınar, G.E., Yalçıner, A.C., Güler, I., Ergin, A., (2017), “Application of XBeach in a Beach Nourishment and Restoration Project A Case Study: Alanya-Turkler, Turkey,” Poster Presentation in “XBeach X” (10th Year Anniversary) Free User Conference 01-03 November 2017, Delft, The Netherlands.
• Baykal, C., Sumer, B.M., Fuhrman, D.R., (2016), “Numerical modeling of flow and scour around a vertical cylindrical pile in combined wave and current”, 35th Int. Conf. on Coastal Eng., 17-20 Nov. 2016, Antalya, Turkey.
• Pekcan,O., Ersöz, A.B., Teke, T., Doğan, G.G., Özyurt, G.T., Baykal, C., (2016), “Damage identification of coastal structures using image processing techniques”, 35th Int. Conf. on Coastal Eng., 17-20 Nov. 2016, Antalya, Turkey.
• Kısacık, D., Kaboğlu, G., Keleş, B.B., Özyurt, G.T., Baykal, C., Güler, I., (2016), “Storm surge and flooding in Izmir bay and a suggestion for coastal protection: stilling wave basin”, 35th Int. Conf. on Coastal Eng., 17-20 Nov. 2016, Antalya, Turkey.
• Özyurt, G.T., Güler, H.G., Baykal, C., Ak, G.H. Yılmaz, M.T., (2016), “Effect of Temporal Downscaling Methods of Long Term Wind Data on the DesignWave Parameters in the Black Sea”, 35th Int. Conf. on Coastal Eng., 17-20 Nov. 2016, Antalya, Turkey.
• Söğüt, E., Baykal, C., Güler, I., Ergin, A., Demirci, E., (2016), “Numerical investigation of long-term beach evolution around shore-normal groins using Xbeach”, 35th Int. Conf. on Coastal Eng., 17-20 Nov. 2016, Antalya, Turkey.
• Demirci, E., Baykal, C., Güler, I., Ergin, A., Söğüt, E., (2016), “Numerical Modelling on Hydrodynamic Flow Conditions and Morphological Changes using XBeach near Manavgat River Mouth, Antalya,Turkey”, 35th Int. Conf. on Coastal Eng., 17-20 Nov. 2016, Antalya, Turkey.
• Doğan,G.G., Özyurt, G.T., Baykal, C., Yalçıner, A.C., (2016), “Performance of rubble mound and caisson type breakwaters under extreme waves”, 35th Int. Conf. on Coastal Eng., 17-20 Nov. 2016, Antalya, Turkey.
• Güler, H.G., Arikawa, T., Baykal, C., Yalçıner, A.C., (2016), “Numerical modelling of physical model experiments on rubble mound breakwaters under tsunami attack using IHFoam”, 35th Int. Conf. on Coastal Eng., 17-20 Nov. 2016, Antalya, Turkey.
• Fuhrman, D.R., Larsen, B.E., Baykal, C., Sumer, B.M., (2016), “Tsunami induced scour around monopile foundations”, 35th Int. Conf. on Coastal Eng., 17-20 Nov. 2016, Antalya, Turkey.
• Güler, H.G., Baykal, C., Özyurt, G.T., Kısacık, D., (2016), “Performance of Statistical Temporal Downscaling Techniques of Wind Speed Data Over Aegean Sea”, European Geosciences Union (EGU) General Assembly, Vienna, Austria, 17-22 April 2016 (oral presentation only).
• Doğan,G.G., Özyurt, G.T., Baykal, C., (2016), “Modelling of Performance of Caisson Type Breakwaters under Extreme Waves”, European Geosciences Union (EGU) General Assembly, Vienna, Austria, 17-22 April 2016 (oral presentation only).
• Demirci, E., Baykal, C., Güler, I., Söğüt, E., (2016), “Comparison of Laboratory Experimental Data to XBeach Numerical Model Output”, European Geosciences Union (EGU) General Assembly, Vienna, Austria, 17-22 April 2016 (oral presentation only).
• Demirci, E., Baykal, C., Özyurt T.G., and Söğüt, E., (2015), Investigation on Hydrodynamic Flow Conditions at the Manavgat River Mouth in Combined Flooding of River Surface Runoff and Storm Surge, 55th Conference of Estuarine Coastal Sciences Association (ECSA), London, UK, 06-09 September 2015 (oral presentation only).
• Baykal, C., Ergin, A., Güler, I., Özyurt T.G., Söğüt, E., Güler, H.G., and Doğan, G.G., (2015), Modelling long term morphological changes with XBeach: case study of Kizilirmak River mouth, Turkey, European Geosciences Union (EGU) General Assembly, Vienna, Austria, 12-17 April 2015 (oral presentation only).
• Sumer, B. M., Baykal, C., Fuhrman, D. R., Jacobsen, N. G. and Fredsøe. J. (2014). “Numerical calculation of backfilling of scour holes.” 7th International Conference on Scour and Erosion, Perth, Western Australia, 2-4 December 2014. doi: 10.1201/b17703-83 (proceeding paper).
• Baykal, C., Fuhrman, D. R., Sumer, B. M., Jacobsen, N. G. and Fredsøe. J. (2014). “Numerical Modeling of Backfilling Process around Monopiles.” 34th International Conference on Coastal Engineering, Seoul, Korea, 15-20 June 2014. doi:10.9753/icce.v34.sediment.22 (proceeding paper).
• Fuhrman, D. R., Baykal, C., Sumer, B. M., Jacobsen, N. G. and Fredsøe. J. (2014). “Numerical Simulation of Wave-Induced Scour and Backfilling below Submarine Pipelines.” 34th International Conference on Coastal Engineering, Seoul, Korea, 15-20 June 2014 (oral presentation only).
• Şimşek, K.C., Baykal, C., Ergin, A., Güler, I., (2014) “An Experimental Study on the Cumulative Damage Development of Rubble Mound Structures.” 34th International Conference on Coastal Engineering, Seoul, Korea, 15-20 June 2014 (oral presentation only).
• Baykal, C., Ergin, A., Güler, I., (2012) “An Energetic Type Model for the Cross-shore Distribution of Total Longshore Sediment Transport Rate”, Proc. of 33rd Int. Conf. on Coastal Eng., 01-06 July 2012, Santander, Spain. doi:10.9753/icce.v33.sediment.40 (oral presentation and proceeding paper)
• Özyurt, G., Ergin, A., Baykal, C., (2010), “Fuzzy Vulnerability Assessment of Coastal Areas To Sea Level Rise”, Proc. of 32nd Int. Conf. on Coastal Eng., June 30 – July 5, 2010, Shanghai, China. doi:10.9753/icce.v32.management.6 (proceeding paper).
• Güler, I., Baykal, C., Ergin, A., (2008), “Shore Stabilization by Artificial Nourishment, A Case Study: A Coastal Erosion Problem in Side, Turkey”, Proc. of 7th Int. Conf. on Coastal and Port Eng. in Developing Countries, 24-28 Feb. 2008, Dubai, UAE. Paper No: G-06 (oral presentation and proceeding paper).
• Ergin, A., Güler, I., Yalçıner, A.C., Baykal, C., Artagan S.S., Şafak, I., (2006), “A One-Line Numerical Model for Wind Wave Induced Shoreline Changes”, 7th Int. Cong. on Advances in Civil Eng., Yıldız Technical University, Istanbul, Turkey (oral presentation and proceeding paper).

Book Chapter

• Baykal, C., Ergin, A., Güler, I., (2011), “Intervention of Human Activities on Geomorphological Evolution of Coastal Areas: Cases from Turkey”, In: Piacentini, T. and Miccadei, E., editors. Studies on Environmental and Applied Geomorphology, Intech Open Access Publisher, ISBN 978-953-51-0361-5, doi: 10.5772/27941

National Conference Papers

• Akyol, B., Gazaloğlu, G., Guler, H.G., Baykal, C., Özyurt, G.T., Guler, I., Yalçıner, A.C., Ergin, A. (2022). “Koruma Tabakasında Tetrapod Bloklar Kullanılan Dalgakıran Kesitinin Antifer Bloklar ile Güçlendirilmesi”, Türkiye İnşaat Mühendisliği 18. Teknik Kongre ve Sergisi, 7-9 Kasım 2022, İstanbul, Turkey. (proceeding paper)
• Çiçek, Y.A., Senturk, B.U., Guler, H.G., Baykal, C., Özyurt, G.T., Yalçıner, A.C., Guler, I., Ergin, A. (2022). “Kurupelit Yat Limanında Meydana Gelen Kıyı Şeridi Değişiminin Sayısal Modellenmesi”, Türkiye İnşaat Mühendisliği 18. Teknik Kongre ve Sergisi, 7-9 Kasım 2022, İstanbul, Turkey. (proceeding paper)
• Isik E. and Baykal, C., (2018), “Kum Beslemesi Uygulamalarında Jeotekstil Tüplerin Kullanımı Üzerine Fiziksel Model Deneyleri”, 9th National Coastal Engineering Symposium, 1-3 Nov. 2018, Adana, Turkey. (proceeding paper)
• Baykal, C., Özyurt, G.T., Isik, E., Gozlet, M.S., Güler, H.G. (2018). “Yapay Bloklu Kıyı Tahkimatı Denge Ve Dalga Aşma Durumlarının Araştırılması Üzerine Bir Fiziksel Model Çalışması”, 9th National Coastal Engineering Symposium, 1-3 Nov. 2018, Adana, Turkey. (proceeding paper)
• Güler, H.G., Isik, E., Sharghivand, N., Baykal, C., Güler, I., Ergin, A., (2018). “Düzenli Dalgaların İlerleyişinin Benzetiminde Swash Sayısal Modelinin Performansının Değerlendirilmesi”, 9th National Coastal Engineering Symposium, 1-3 Nov. 2018, Adana, Turkey. (proceeding paper)
• Karakuş, D., Cihan, H.K., Baykal, C., Sağ, M., Yalçıner, A.C., (2018). “Xbloc’lu Tahkimat Kesitinde Sayısal Ve Fiziksel Model Sonuçlarına Göre Dalga Aşması Rize Artvin Havalimanı Tahkimatı”, 9th National Coastal Engineering Symposium, 1-3 Nov. 2018, Adana, Turkey. (proceeding paper)
• Ozyurt, G.T., Ergin, A., Guler, H.G., Baykal, C., Guler, I., Esen, M., Kirezci, C., Yalciner, A.C., (2018). “Kıyı Mühendisliği Uygulamalarında Tasarım Dalgası ve Risk”, 3rd National Conference on Marine Sciences, 9-12 May 2018, Izmir, Turkey.
• Doğan, G.G., Özyurt, G.T., Baykal, C., (2016), “Taş Dolgu Ve Keson Tipi Dalgakıran Performanslarının Ekstrem Dalgalar Altında Fiziksel Model Deneyleri İle İncelenmesi”, Türkiye Deniz Bilimleri Konferansı, 31 Mayıs – 3 Haziran 2016, ODTÜ, Ankara.
• Atak, D., Bezazoğlu, S., Baykal, C., Özyurt, G.T., Güler, H.G., Güler, I., Ergin, A., (2016), “Şekillenmeyen Basamak Tipi Dalgakıranlar İle Şekillenebilen Dinamik Stabil Dalgakıranların Karşılaştırılması, Örnek Bir Çalışma: Ordu-Giresun Havalimanı”, Türkiye Deniz Bilimleri Konferansı, 31 Mayıs – 3 Haziran 2016, ODTÜ, Ankara.
• Güler, H.G., Özyurt, G.T., Baykal, C., (2016), “Dalga Tahmini Ve Rüzgâr Gücü Potansiyeli Modellerinde Rüzgâr Verisinin Zamansal Çözünürlüğünün Arttırılması Yöntemlerinin Değerlendirilmesi”, Türkiye Deniz Bilimleri Konferansı, 31 Mayıs – 3 Haziran 2016, ODTÜ, Ankara.
• Güler, H.G., Baykal, C., Yalçıner, A.C., Ergin, A., Tarakçıoğlu, G.Ö., Güler. I., (2014), “Sarıgerme Bölgesinde Oluşan Hortum ve Bölgeye Etkileri”, 8th National Coastal Engineering Symposium, İstanbul, Turkey. (proceeding paper)
• Güler, H.G., Ergin, A., Baykal, C., Tarakçıoğlu, G.Ö., Güler. I., (2014), “Tasarım Derinliğinin Taş Dolgu Dalgakıranların Tasarımına Etkisi”, 8th National Coastal Engineering Symposium, İstanbul, Turkey. (proceeding paper)
• Baykal, C., Sumer, B.M., Fuhrman, D.R., Jacobsen, N.G., Fredsoe, J., (2014), “Silindir Yapılar Çevresinde Akım Koşulları ve Oyulma Süreçlerinin Sayısal Modellenmesi”, 8th National Coastal Engineering Symposium, İstanbul, Turkey. (oral presentation and proceeding paper)
• Baykal, C., Ergin, A., Güler, I., (2011), “Kıyı Boyu Akıntılarının Sayısal Modellenmesi”, 7th National Coastal Engineering Symposium, Trabzon, Turkey. (oral presentation and proceeding paper)
• Esen, M., Baykal, C., Güler, I., Ergin, A., (2007), “Yapay Besleme ile Kıyı Dengelenmesi, Örnek Uygulama: Bir Kıyı Aşınımı Sorunu, Side, Türkiye”, 6th National Coastal Engineering Symposium, İzmir, Turkey. (proceeding paper).

Theses Supervised/Co-supervised (completed)

• Çandır, Semih Batuhan, (2022), “Investigation of Numerical Schemes and Their Effects on Impact Pressures in Numerical Modelling”, M.Sc. Thesis, Middle East Technical University, Dept. of Civil Eng., Supervisor: Cüneyt Baykal, 2022-02-08, Ankara, Turkey.
• Şentürk, Barış Ufuk, (2022), “Comparison of turbulence model and wall function couplings for simulating scour”, M.Sc. Thesis, Middle East Technical University, Dept. of Civil Eng., Supervisor: Cüneyt Baykal, 2022-01-19, Ankara, Turkey.
• Yaman, Mert, (2022), “Scour at the rear side of rubble mound revetment due to the solitary-like wave overtopping,” M.Sc. Thesis. Middle East Technical University, Dept. of Civil Eng., Supervisor: Prof.Dr. Ahmet Cevdet Yalçıner, Co-Supervisor: Cüneyt Baykal, 2022-05-11, Ankara, Turkey.
• Yıldırım, Mehmet Emre, (2021), “Scour at the rear side of rubble mound revetments”, M.Sc. Thesis, Middle East Technical University, Dept. of Civil Eng., Supervisor: Cüneyt Baykal, 2021-08-17, Ankara, Turkey.
• Özsoy, Can, (2021), ”Development of a quasi-2DH model for numerical modeling of shoreline changes”, M.Sc. Thesis, Middle East Technical University, Dept. of Civil Eng., Supervisor: Cüneyt Baykal, 2021-02-15, Ankara, Turkey.
• Göral, Koray Deniz, (2020), “Physical modeling of solid spheres’ motion under solitary wave attack”, M.Sc. Thesis, Middle East Technical University, Dept.of Civil Eng., Supervisor: Cüneyt Baykal, Co-Supervisor: Ahmet Cevdet Yalçıner, 2020-08-31, Ankara, Turkey.
• Kaboğlu, Sinem Oğuz, (2020), “Kombine akımlar altında oluşan sediman dalgacıkları: Gediz ve Büyük Menderes örnekleri”, Doktora Tezi, Dokuz Eylül Üniversitesi, Supervisor: Atilla Hüsnü Eronat, Co-supervisor: Cüneyt Baykal, 2020-03, İzmir, Turkey.
• Güler, Hasan Gökhan, (2020), “Numerical modelling of wave-structure interaction problems through CFD methods”, Ph.D. Thesis, Middle East Technical University, Dept.of Civil Eng., Supervisor: Ahmet Cevdet Yalçıner, Co-supervisor: Cüneyt Baykal, 2020-03-12, Ankara, Turkey.
• Gözlet, Mehmet Sedat, (2019), “The coastal circulation model of Büyük Menderes river mouth and adjacent coastal areas”, Middle East Technical University, Dept.of Civil Eng., Supervisor: Gülizar Özyurt Tarakcıoğlu, Co-Supervisor: Cüneyt Baykal, 2019-09-23, Ankara, Turkey.
• Işık, Emrecan, (2019), “An experimental study on the performance of geotextile tubes in beach nourishment applications” , Middle East Technical University, Dept.of Civil Eng., Supervisor: Cüneyt Baykal, 2019-08-29, Ankara, Turkey.
• Bozgeyik, Mehmet Erkam, (2019) “Application of suitability index to Turkish coasts for wave energy site selection”, M.Sc. Thesis, Middle East Technical University, Dept.of Civil Eng., Supervisor: Gülizar Özyurt Tarakcıoğlu, Co-Supervisor: Cüneyt Baykal, 2019-09-12, Ankara, Turkey.
• Karakaş, Kadir, (2019) “Investigation of flow and scour around head of a vertical wall breakwater”, M.Sc. Thesis, Middle East Technical University, Dept.of Civil Eng., Supervisor: Cüneyt Baykal, 2019-08-27, Ankara, Turkey.
• Çınar, Ezgi G., (2018), “Comparison of 2D and 3D Models in Application to Long Wave Motion and Its Interaction with A Vertical Wall”, M.Sc. Thesis, Middle East Technical University, Dept.of Civil Eng., Supervisor: Ahmet Cevdet Yalçıner, Co-Supervisor: Cüneyt Baykal, 2018-07-05, Ankara, Turkey.
• Akdeniz, İzel, (2018). “3-Dimensional Numerical Circulation Modeling: A Case Study On The Coastal Processes In Gocek And Fethiye Bays, Turkey” M.Sc. Thesis, Middle East Technical University, Dept.of Civil Eng., Supervisor: Ahmet Cevdet Yalçıner, Co-Supervisor: Cüneyt Baykal, 2018-09-05, Ankara, Turkey.
• Bezazoğlu, Semih, (2016), “A Comparative Study on Stability and Overtopping Performances of Reshaping Berm Breakwaters”, M.Sc. Thesis, Middle East Technical University, Dept.of Civil Eng., Supervisor: Cüneyt Baykal, Co-Supervisor: Işıkhan Güler, 2016-09-06, Ankara, Turkey.
• Demirci, Ebru, (2016), “Numerical Modeling of Short Term Morphological Changes Around Coastal Structures and At The River Mouths”, M.Sc. Thesis, Middle East Technical University, Dept.of Civil Eng., Supervisor: Cüneyt Baykal, Co-Supervisor: Işıkhan Güler, 2016-09-05, Ankara, Turkey.

Seminars

• Özyurt, G.T., Baykal, C., Kırca, V.Ş.Ö. “Kıyı ve Deniz Mühendisliği Problemlerini Modellemede Belirsizlikler”, 9th National Coastal Engineering Symposium, 1-3 Nov. 2018, Adana, Turkey. (keynote presentation)
• Baykal, C., (2016), “CFD Modeling in Hydro-Morphodynamics around Offshore Wind Turbine Monopile Foundations”, METU Joint Aerospace/Ruzgem Seminars, METUWIND Seminar Room, 25 March 2016, Ankara, Turkey.
• Baykal, C., (2014), “Numerical Modeling of Scour and Backfilling Processes Around Offshore Wind Turbine Foundations”, Dept. of Civil Engineering, Middle East Technical University, 2 June 2014, Ankara, Turkey
• Baykal, C., (2013), “Numerical Modeling of Scour and Backfilling Processes Around Monopiles”, DTU-MEK Seminars, Technical University of Denmark, Department of Mechanical Engineering, 10 April 2013, Kgs. Lyngby, Denmark
• Baykal, C., (2010), “Wave-Structure Interaction and Effects on Coastal Morphology”, Seminar on Coastal and Ocean Engineering”, Turkish Chamber of Civil Engineers, 18 June 2010, Adana, Turkey