THESES SUPERVISED
ONGOING
Kaan, F., “Identification and Experimental Modal Analysis of Nonlinear Systems with Internal Resonance”, (Started in September 2022 – Co-Supervision with Assoc. Prof. Dr. B. Özer).
Terzi, M., “An Investigation on Modal Identification of Nonlinear Structures” (Started in February 2022 – Co-Supervision with Assoc. Prof. Dr. B. Özer).
Ekinci, E. C., “Structural Modification of Nonlinear Systems Using Modal Model”, (Started in September 2020 – Co-Supervision with Assoc. Prof. Dr. B. Özer).
COMPLETED
Aydoğan, M. Ö., (Ph. D.) “Dynamic Modelling and Analysis of Split-Torque Face-Gear Systems”, September 2022, (Co-Supervision with Dr. Zihni Burçay Sarıbay).
Koyuncu, A., (Ph. D.) “Design, Modelling and Analysis of a Novel Implantable Bone Conduction Hearing Aid with a Piezoelectric Actuator”, September 202, (Co-Supervision with Assoc. Prof. Dr. M. Şahin – Aerospace Eng. Department).
Karaağaçlı, T., (Ph. D.) “Nonlinear System Identification and Nonlinear Experimental Modal Analysis by Using Response Controlled Stepped Sine Testing”, December 2020.
Karataş, G., “Suppression of Tool Tip FRF in Machine Tool Assemblies by Component Mode Tuning Method”, September 2020, (Co-Supervision with Prof. Dr. E. Budak, Sabancı University).
Camcı, M. S., “Modifications in Optomechanical Systems for Vibration Reduction by Using Sequential Model Updating Method“, July 2020.
Tekin, M., “Dynamic Modeling of Joints in 3D Structural Models”, November 2019.
Bilen, M. E., “Development of A Hybrid Global Optimization Algorithm and Its Application to Helicopter Rotor Structural Optimization”, June 2019, (Co-Supervision with Prof. Dr. E. Ciğeroğlu).
Öztürk, V. Y., (Ph. D.) “A Parametric Study on Planetary Gear Dynamics”, June 2018, (Co-Supervision with Assoc. Prof. Dr. E. Ciğeroğlu).
Kalaycıoğlu, T., (Ph. D.) “Investigation of Decoupling Techniques for Linear and Nonlinear Systems”, March 2018.
Ferhatoğlu, E., “A New Modal Superposition Method for Nonlinear Vibration Analysis of Structures Using Hybrid Mode Shapes”, December 2017, (Co-Supervision with Assoc. Prof. Dr. E. Ciğeroğlu).
Yilmaz, E. E., “Dynamic Modelling in Micromachining”, December 2015, (Co-Supervision with Prof. Dr. E. Budak, Sabancı University).
Canbaloğlu, G., (Ph. D.) “Development of a Model Updating Technique for Non-Linear Systems”, September 2015.
Özşahin, O., (Ph. D.) “Analysis and Modelling of Machine Tool Dynamics and Cutting Stability During Operation”, May 2014, (Co-Supervision with Prof. Dr. E. Budak, Sabancı University)).
Gencoğlu, C., “Active Vibration Control of Beams and Cylindrical Structures Using Piezoelectric Patches”, January 2014.
Koyuncu, A., “Identification of Nonlinearities in Structural Dynamics by Using Artificial Neural Networks and Optimization”, September 2013, (Co-Supervision with Assist. Prof. Dr. E. Ciğeroğlu).
Beker, L., “MEMS Piezoelectric Energy Harvester for Cochlear Implant Applications”, July 2013, (Co-Supervision with Assoc. Prof. Dr. H. Külah, Electrical and Electronics Engineering Department).
Lüleci, İ. F., “Active Vibration Control of Beam and Plates by Using Piezoelectric Patch Actuators”, January 2013.
Aykan, M., (Ph. D.) “Possibilistic Interpretation of Mistuning in Bladed Disks by Fuzzy Algebra”, January 2013.
Karataş, H. Ç., “Identification of Mistuning in Bladed Disk Assemblies”, September 2012 – (Co-Supervision with Assist. Prof. Dr. E. Ciğeroğlu ).
Tol, Ş., “Dynamic Modeling of Structural Joints”, June 2012.
Kalaycıoğlu, T., “Harmonic Response of Large Engineering Structures with Nonlinear Modifications”, September 2011.
Karaağaçlı, T., “Determination of Dynamically Equivalent FE Models of Aircraft Structures by Using Modal Test Data” September 2010, (Co-Supervision with Dr. E. N. Yıldız, SAGE).
Demirkan, Ö., “The Effects of Structural Modifications on Acoustic Characteristics of Enclosed Bodies”, July 2010, (Co-Supervision with Prof. Dr. M. Çalışkan).
Yümer, M. E., “On the Non-Linear Vibration and Mistuning Identification of Bladed Disks” January 2010, (Co-Supervision with Dr. E. Ciğeroğlu).
Alan, S. “Development of a Fast Analytical Method for Prediction of Part Dynamics in Machining Stability Analysis”, September 2009, (Co-Supervision with Assoc. Prof. Dr. E. Budak, Sabancı University).
Kılıç, Z. M., “Non-linear Dynamic Modeling and Analysis of Spindle-Tool Assemblies in Machining Centers”, August 2009, (Co-Supervision with Prof. Dr. Yusuf ALTINTAŞ, University of British Columbia, Canada).
Bediz, B., “Human Tibial Bone Strength Prediction by Vibration Analysis for Diagnosing Progressing Osteoporosis”, July 2009, (Co-Supervision with Prof. Dr. Feza Korkusuz)
Canbaloğlu, G., “Structural Modification with Additional Degrees of Freedom in Large Systems”, July 2009, (Co-Supervision with Dr. Halidun Fildişi, ASELSAN).
Öztürk, M., “Finite Element Structural Modal Updating by Using Experimental Frequency Response Functions”, May 2009.
Abat, D., “Harmonic Vibration Analysis of Large Structures with Local Nonlinearity”, February 2009.
Avşar, A. L., “Dynamic Modeling and Analysis of Vibration Effects on Performance of Optical Systems”, August 2008, (Co-Supervision with Dr. Halidun Fildişi, ASELSAN).
Özşahin, O., “An Investigation on Dynamic Contact Parameters in Machining Center Spindle – Tool Assemblies”, August 2008, (Co-Supervision with Assoc. Prof. Dr. E. Budak, Sabancı University).
Arslan, Ö., “Modal Identification of Non-Linear Substructures and Implementation in Structural Coupling Analysis”, August 2008.
Orbay, G., “Nonlinear Vibration of Mistuned Bladed Disk Assemblies”, June 2008.
Aytekin, B., “Vibration Analysis of PCBs and Electronic Components”, April 2008.
Atlar, S., “Modeling Part Dynamics in Machining Processes Considering Material Removal”, December 2007, (Co-Supervision with Assoc. Prof. Dr. E. Budak, Sabancı University).
Köksal, S., “Development and Comparative Evaluation of a New Structural Modification Method in Application to Aircraft Structures”, September 2006, (Co-Supervision with Dr. M. Cömert, SAGE).
Kozak, M. T. “Investigation of Model Updating Techniques and their Applications to Aircraft Structures”, September 2006, (Co-Supervision with Dr. M. Cömert, SAGE).
Büke, F., “An Investigation on the Application of Operational Modal Analysis”, September 2006, (Co-Supervision with Dr. M. Cömert, SAGE).
Ertürk, A., “Dynamic Modeling Spindle-Tool Assemblies in Machining Centers”, May 2006, (Co-Supervision with Assoc. Prof. Dr. E. Budak, Sabancı University) (Presently; Assistant Professor at Georgia Institute of Technology).
Gürkan, E., “Nonlinear Mathematical Modeling of Gear Rotor Bearing Systems Including Bearing Clearance” December 2005.
Aydoğan, M.Ö. “Damage Detection in Structures Using Vibration Measurements”, December 2003.
Ciğeroğlu, E., “Non-linear Vibration Analysis of Bladed Disks with Dry Friction Dampers”, August 2002 (Presently; Associate Professor at METU).
Yıldız, E.N., “Aeroelastic Analysis of Nonlinear Control Surface”, December 2000.
Cömert, M. D., (Ph. D.), “Dynamics of Interacting Missile-Launcher Systems with Flexibility”, September 2000 (Presently; System and Control Technologies Group Coordinator, Defence Industries Research and Development Institute (SAGE), Ankara).
Sever, İ. A., “Nonlinear Body Bending Aeroelasticiy of Kinetic Energy Projectiles”, December 1999.
Özer, M. B., “A New Method on Identification of Symmetrical Non-Linearities in Structures”, August 1999.
Doğruer, C. U., “Dynamic Analysis of Spur Gear”, June 1999.
Güler, H. C., (Ph. D.) “Biomechanical Modeling of Lower Extremity and Simulation of Foot during Gate” (Co-Supervision with Prof. Dr. S. T. Tümer), December 1998.
Özbek, M., “Computer-Based Teaching Using Hypermedia for the Mechanical Vibrations Course”, February 1996.
Cömert, M. D., “Harmonic Forced Vibration Analysis of Assembled Structures with Non-Linear Coupling”, September 1994 (Presently; System and Control Technologies Group Coordinator, Defence Industries Research and Development Institute, Ankara)
Maliha, R. M., (Ph.D.), “Non-Linear Dynamic Analysis of Rotors to Internal Excitation by Using Describing Functions and Finite Methods”, August 1994.
Şardağı, Y., “Flexible Rotor Balancing by the Influence Coefficient Method”, (Co supervisor: Prof. Dr. G. Aksu), January 1994.
Okan, S. T., “Dynamic Analysis of Mult-Stage Helical Geared Rotors with Transfer Matrix Method”, February 1994.
Tahtalı, M., “Vibration Analysis of Damped Structures and Structural Reanalysis Using a New Structural Modification Method”, January 1993 (Presently; Lecturer at School of Aerospace and Mechanical Engineering, Australian Defence Force Academy, Australia).
Kuran, B., “Dynamic Analysis of Harmonically Excited Non-linear Structures by Using Iterative Modal Method”, August 1992.
Kesan, M., “Modeling and Analysis of Spur and Helical Gears on Flexible Rotors”, January 1992.
Güler, H. C., “Biomechanical Simulation of Human Impact Landing Using an Open Linkage Dynamic Model”, January 1992 (Presently; Senior Engineer, Bertec, Ohio State University, USA)
Yılmaz, D., “Dynamic Modelling and Analysis of Multi-Geared Rotors Including Lateral and Torsional Vibration Coupling”, August 1991.
Yalçıntaş, M., “Fault Diagnosis of Gears by Computer Simulation” August 1990.
Tanrıkulu, Ö., “Identification of Nonlinearities in Vibrating Structures” (September 1989 – September 1990). (Completed his thesis in Imperial College London)
Şener, Ö. Sedat, “Dynamic Analysis of Geared Shaft Systems by Using Continuous System Models”, July 1989.
Budak, E., “Dynamic Analysis of Nonlinear Structures for Harmonic Excitation”, July 1989(Presently; Associate Professor, Sabanci University, Turkey).
Çetinkaya, N., “Vibration Analysis of Structures Using Substructure Synthesis”, (Co supervisor: Assoc. Prof. Dr. Mehmet Çalışkan) February 1989.
Kahraman, A., “Geared Rotor Dynamics”, (Co-supervision of a Ph.D. thesis with Prof. Dr. Houser at The Ohio State University during the period 1986-1987) (Presently; Professor and Director of the Gear Dynamics and Gear Noise Research Laboratory, Mechanical Engineering Department, Ohio State University, USA).
Eşkinat, E., “Vibration Analysis of Large Structures by Finite Element Method and Substructure Synthesis Technique”, March 1985 (Presently; Associate Professor, Mechanical Engineering Department, Bogazici University, Turkey).
Çandır, B., “Optimum Dynamic Vibration Absorbers for Beams”, March 1985.
Bakiler, T. C., “Experimental Determination of Complex Modulus of Elasticity of Viscoelastic Materials”, September 1984.
Karacaer, V., “Design and Construction of a Vibratory Table”, May 1984.
Yaman, Y., “Modal Identification of Structurally Damped Mechanical Structures”, February 1984 (Presently; Professor, Department of Aerospace Engineering, Middle East Technical University, Turkey).
Erdaş, G., “Free Vibration Analysis of Beams and Plates Using Finite Element Method”, October 1983.
Korkusuz, E., “Motion Analysis of a Particle on Vibratory Conveyors”, July 1983.
Özkan, Z. L., “Whirling Speeds and Unbalance Responses of Rotating Shafts Using Finite Element Methods”, January 1983 (Presently; Quality Management & Engineering Services Director, MIKES, Ankara).
Semercigil, S. E., “Dynamic Response of Large Order Damped Linear Mechanical Systems by Modal Analysis”, August 1982 (Presently; Senior Lecturer, School of Architectural, Civil and Mechanical Engineering, Victoria University, Australia).
Demirer, E. S., “Free and Forced Vibration Analysis of Beams Carrying Discrete Masses”, June 1982.
Botsalı, F. M., “Free and Forced Vibrations of Continuous Beams on Elastic Supports by Modal Analysis”, February 1982 (Presently; Professor, Mechanical Engineering Department, Selcuk University, Turkey).