Publications

BOOKS

Özgüven, H. N., Noise Control – Industrial and Environmental Noise, Publication of Turkish Acoustical Society, 2008 (271 p.) (First Publication: Industrial Noise Control, Publication of Turkish Society of Mechanical Engineers, Ankara, 1986) (in Turkish).

Dokumacı, E., and Özgüven H.N., Handbook for Mechanical Engineers, Volume 1 “Mechanical Vibrations and Noise Control” section (p 6.02-6.47), Publication of Turkish Chamber of Mechanical Engineers, Ankara, October 1994 (in Turkish).

Platin, B. E., Çalışkan, M., Özgüven, H.N., Dynamics of Engineering Systems, METU, 1987 (400 pp.).

PAPERS

Karaağaçlı, T. Özgüven, H. N., “Experimental Modal Analysis of Structures with High Nonlinear Damping by Using Response-Controlled Stepped-Sine Testing”, IMAC-XLI Conference and Exposition on Structural Dynamics, Austin, TX, February 13-16, 2023.

Ekinci, E. C., Özer, M. B., Özgüven, H. N., “A Novel Approach for Local Structural Modification of Nonlinear Structures“, IMAC-XLI Conference and Exposition on Structural Dynamics, Austin, TX, February 13-16, 2023.

Bhattu, A. , Jamia, N., Hermann, S., Müller, F., Scheel, M., Özgüven, H. N., Schwingshackl, C., Krack, M., ” The TRChallenge – Experimental quantification of nonlinear modal parameters and confrontation with the predictions”, IMAC-XLI Conference and Exposition on Structural Dynamics, Austin, TX, February 13-16, 2023.

Gürbüz, M. F., Karaağaçlı, T., Özer, M. B., Özgüven, H. N., “Bypassing the Repeatability Issue in Nonlinear Experimental Modal Analysis of Jointed Structures by using the RCT-HFS Framework”, IMAC-XLI Conference and Exposition on Structural Dynamics, Austin, TX, February 13-16, 2023.

Aydoğan, M. Ö., Sarıbay, Z., Özgüven, H. N., “Non-linear Dynamic Modelling and Analysis of Split-Torque Face-Gear Drive Systems”, Journal of Vibration and Acoustics, pp. 1-39, January 2023.

Hossein, S., Ciğeroğlu, E, Özgüven, H. N., “Determination of Nonlinear Joint Forces and Nonlinear Identification of Jointed Connections Using FRF”, Special Topics in Structural Dynamics & Experimental Techniques, Volume 5, January 2023, DOI:10.1007/978-3-031-05405-1_7

Koyuncu, A., Karaağaçlı, T., Şahin, M., Özgüven H. N., “Experimental Modal Analysis of Nonlinear Amplified Piezoelectric Actuators by Using Response-Controlled Stepped-Sine Testing”, August 2022, Experimental Mechanics, DOI: 10.1007/s11340-022-00878-y

Karaağaçlı, T., Özgüven H. N., “Experimental Quantification and Validation of Modal Properties of Geometrically Nonlinear Structures by Using Response‑Controlled Stepped‑Sine Testing”, October 2021, Experimental Mechanics, DOI:10.1007/s11340-021-00784-9

Hossein, S., Ciğeroğlu, E, Özgüven, H. N., “3D Linear Identification of Mechanical Joint Usıng FRF Decoupling and Inverse Structural Modification Methods”, Proceedings of the ASME 2021 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC-CIE 2021, Virtual, Online, August 17-20, 2021.

Öztürk, Y., Ciğeroğlu, E. Özgüven, H. N., “Ideal Tooth Profile Modifications for Improving Nonlinear Dynamic Response of Planetary Gear Trains”, Journal of Sound and Vibration, v.500, n.4, February 2021, DOI: 10.1016/j.jsv.2021.116007.

Karaağaçlı, T., Özgüven H. N., ¨Experimental modal analysis of geometrically nonlinear structures by using response-controlled stepped-sine testing¨, IMAC XXXIX: Conference & Exposition on Structural Dynamics, Virtual, 8-11 February 2021.

Karataş, G., Özşahin, O., Özgüven, H. N., Budak, E., “Design optimization of tool holder extension for enhanced chatter stability by using component mode tuning method”, Procedia CIRP, 9th CIRP Conference on High Performance Cutting, January 2021, DOI: 10.1016/j.procir.2021.02.033.

Karaağaçlı, T., Özgüven, H.N., “Experimental Identification of Backbone Curves of Strongly Nonlinear Systems by Using Response-Controlled Stepped-Sine Testing (RCT)”, Vibration, v.3, pp.266-280. doi.org/10.3390/ vibration3030019. (Special Issue: Data-Driven Modelling of Nonlinear Dynamic Systems), September 2020.

Karaağaçlı, T., Özgüven H. N., ¨Experimental modal analysis of nonlinear systems by using response-controlled stepped-sine testing”, Mechanical Systems and Signal Processing, v.146, January 2021 (online: June 2020), DOI: 10.1016/j.ymssp.2020.106872.

Karaağaçlı, T., Özgüven H. N., ¨A frequency domain nonparametric identification method for nonlinear structures: Describing surface method”, Mechanical Systems and Signal Processing, v.144, Ocober 2020 (online: May 2020), doi.org/10.1016/j.ymssp.2020.106872.

Karaağaçlı, T., Özgüven H. N., ¨ Response-Controlled Stepped-Sine Test (RCT): A New Approach in Measuring Frequency Responses of Nonlinear Systems¨, IMAC XXXVIII: Conference & Exposition on Structural Dynamics, Houston, Texas, February 10-13, 2020.

Karaağaçlı, T., Cigeroglu E., Özgüven H. N., ¨Numerical Computation of Nonlinear Normal Modes (NNMs) by using Response Dependent Nonlinear Mode (RDNM) Concept¨, IMAC XXXVIII: Conference & Exposition on Structural Dynamics, Houston, Texas, February 10-13, 2020.

Tekin, M., Özgüven H. N., ¨ Dynamic Modeling of Bolted Joints Using a Structural Modification Method¨, IMAC XXXVIII: Conference & Exposition on Structural Dynamics, Houston, Texas, February 10-13, 2020.

Ferhatoglu, E., Cigeroglu E., Özgüven H. N., ¨A novel modal superposition method with response dependent nonlinear modes for periodic vibration analysis of large MDOF nonlinear Systems¨, Mechanical Systems and Signal Processing, v.135, 2020 (online: October 2019).

Klaassen, S., Cigeroglu, E., Özgüven, H. N.,¨Identifying the Joint Dynamics of a Bolted Beam System by using FRF Decoupling and the SEMM Expansion Technique¨, Tribomechadynamics 2019, Rice University, Houston, Texas, July 2019.

Ferhatoglu, E., Draher, T., Cigeroglu, E., Krack, M., Özgüven, H. N., ¨Comparison of Linear and Nonlinear Modal Reduction Approaches¨, In: Kerschen G., Brake M., Renson L. (eds) Nonlinear Structures and Systems, Volume 1. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham , January 2019.

Koyuncu, A., Şahin, M., Özgüven, H. N.,  “Extended Abstract: Dynamic Behavior of a Compliant Mechanism Driven by Stacked Piezoelectric Actuators. In: Niezrecki C., Baqersad J. (eds) Structural Health Monitoring, Photogrammetry & DIC, Volume 6. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham, January 2019.

Ferhatoglu, E., Cigeroglu, E., Özgüven, H. N., “A new modal superposition method for nonlinear vibration analysis of structures using hybrid mode shapes”, Mechanical Systems and Signal Processing, v.107, pp.317-342, July 2018. DOI: 10.1016/j.ymssp.2018.01.036.

Kalaycıoğlu, T., Özgüven, H. N., “FRF Decoupling of nonlinear systems”, Mechanical Systems and Signal Processing, v.102, pp. 230-244, March 2018.

Kalaycıoğlu, T., Özgüven, H. N., “Experimental Verification of a Recently Developed FRF Decoupling Method for Nonlinear Systems”, Dynamics of Coupled Structures, Conference Proceedings of the Society for Experimental Mechanics, 4, 36th International Modal Analysis Conference, Orlando, Florida, January 2018, DOI10.1007/978-3-319-74654-8_4.

Koyuncu, A., Özgüven, H. N., “Dynamic Behavior of a Compliant Mechanism Driven by Stacked Piezoelectric Actuators”, Extended Abstract, Proceedings of the Society for Experimental Mechanics, 36th International Modal Analysis Conference, Orlando, Florida, January 2018.

Koyuncu, A., Ciğeroğlu, E., Özgüven, H. N., “Localization and identification of structural nonlinearities using cascaded optimization and neural networks”, Mechanical Systems and Signal Processing, v.95, pp. 219-238, October 2017.

Yılmaz, E. E., Budak, E., Özgüven, H. N., “Modeling and Measurement of Micro End Mill Dynamics Using Inverse Stability Approach”, Procedia CIRP, v. 46, pp. 242-245, 7th HPC 2016 – CIRP Conference on High Performance Cutting, doi:10.1016j.procir.2016.04.114.

Canbaloğlu, G., Özgüven, H. N., “Model updating of nonlinear structures from measured FRFs”, Mechanical Systems and Signal Processing, May 2016, doi:10.1016/j.ymssp.2016.05.001.

Kalaycıoğlu, T., Özgüven, H. N., “New FRF Based Methods for Substructure Decoupling”, Dynamics of Coupled Structures: Volume 4, Proceedings of the 34th IMAC, A Conference and Exposition on Structural Dynamics 2016, Springer, Orlando, Florida, 1-4 February 2016.

Ferhatoğlu, E., Ciğeroğlu, E., Özgüven, H. N., “A Modal Superposition Method for the Analysis of Nonlinear Systems”, Special Topics in Structural Dynamics: Volume 6, Part of the series Conference Proceedings of the Society for Experimental Mechanics Series, pp.. 269-278, Springer, 34th IMAC, Orlando, Florida, 1-4 February 2016.

Canbaloğlu, G., Özgüven, H. N., “Model Updating of a Nonlinear System: Gun Barrel of a Battle Tank”, Nonlinear Dynamics, Volume 1, Conference Proceedings of the Society for Experimental Mechanics Series, pp.. 365-387, Springer, 34th International Modal Analysis Conference, Orlando, Florida, 1-4 February 2016.

Özşahin, O, Budak, E., Özgüven, H. N., “In-Process Tool Point FRF Identification under Operational Conditions Using Inverse Stability Solution”, International Journal of Machine Tools and Manufacture, v.89, pp. 64-73, 2015

Özşahin, O, Budak, E., Özgüven, H. N., “Identification of Bearing Dynamics under Operational Conditions for Chatter Stability Prediction in High Speed Machining Operations”, Precision Engineering, v. 42, pp. 53-65, 2015.

Tol, Ş, Özgüven, H. N., “Dynamic Characterization of Bolted Joints Using FRF Decoupling and Optimization”, Mechanical Systems and Signal Processing, v. 54-55, pp. 124-138, 2015.

Özşahin, O., Budak, O., Özgüven, H. N., “Identification and Modeling of Machine Tool Dynamics During Milling”, 6th National Metal Cutting Symposium, Sabancı University, İstanbul, November 2015 (in Turkish).

Öztürk, V. Y., Ciğeroğlu, E., Özgüven, H. N., “Optimum Profile Modifications to Reduce Dynamic Transmission Error in Spur Gears”, Proceedings of 17^th National Symposium on Theory of Machines, İzmir Yüksek Teknoloji Enstitüsü, 14-17 June 2015 (in Turkish).

Öztürk, Y., Cigeroğlu, E., Özgüven, H. N., “Optimization of Tooth Bending Fatigue Characteristics of Spur Gear Pairs using a Gear Dynamics-based Approach”, ASME 2015 International Design Engineering Technical Conferences, Boston, Massachusetts, 2-5 August 2015.

Canbaloğlu, G., Özgüven, H. N., “Experimental Validation of Pseudo Receptance Difference (PRD) Method for Nonlinear Model Updating”, Nonlinear Dynamics, Volume 1,  Part of the series Conference Proceedings of the Society for Experimental Mechanics Series, pp.. 293-306, Springer, 33rd IMAC, Orlando, FL, February 2015.

Özşahin, O., Özgüven, H. N., Budak, E., “Analytical Modeling of Asymmetric Multi–Segment Rotor–Bearing Systems with Timoshenko Beam Model Including Gyroscopic Moments”, Computers & Structures, v.144, pp. 119-126, November 2014

Öztürk, V. Y, Ciğeroğlu, Özgüven, H. N., “Optimum Profile Modifications for the Minimization of Dynamic Transmission Error”,International Gear Conference, Lyon Villeurbanne, France, August 26-28, 2014.

Kalaycıoğlu, T., Özgüven, H. N., “Nonlinear Structural Modification and Nonlinear Coupling”, Mechanical Systems and Signal Processing, v. 46, n. 2, pp. 289-306, 2014.

Canbaloğlu, G., Özgüven, H. N., “Model Updating of Nonlinear Structures”, Nonlinear Dynamics, Volume 2, Part of the series Conference Proceedings of the Society for Experimental Mechanics Series, pp.. 69-81, Springer, 32nd IMAC, Orlando, Florida, February 3-6, 2014.

Kalaycıoğlu, T, Özgüven, H. N., “Nonlinear Structural Coupling – Experimental Application”, Nonlinear Dynamics, Volume 2, Part of the series Conference Proceedings of the Society for Experimental Mechanics Series, pp 241-248, Springer, 32nd IMAC, Orlando, Florida, February 3-6, 2014.

Demirkan, Ö., Ölçeroğlu, E., Başdoğan, İ. and Özgüven, H. N. “A New Design Approach for Rapid Evaluation of Structural Modifications Using Neural Networks”, Journal of Mechanical Design, v. 135, n.2, 2013 (doi:10.1115/1.4023156).

Çomak, A., Koca, R., Özlü, E., Özşahin, O., Öztürk, E., Tunç, T., Uysal, E., Budak, E.,  Özgüven, H. N., “Stability of Metal Cutting Processes and Machine Tool Dynamics ”, Proceedings of 16^th National Symposium on Theory of Machines, Erzurum, 2013 (in Turkish).

Aykan, M. and Özgüven, H. N. “Parametric Identification of Nonlinearity in Structural Systems Using Describing Function Inversion”, Mechanical Systems and Signal Processing, 2013, (doi.org/10,1016/j.ymssp.2013.03.016).

Yümer, M.E., Ciğeroğlu, E., Özgüven, H. N. “Mistuning Identification of Integrally Bladed Disks with Cascaded Optimization and Neural Networks”, Journal of Turbomachinery – ASME, v.135, n.3, 2013.

Aykan, M., Özgüven, H. N., “Detection of Structural Damage through Nonlinear Identification by Using Modal Testing”, Topics in Modal Analysis, Volume 7, Part of the series Conference Proceedings of the Society for Experimental Mechanics Series, pp. 461-470, Springer, 31st IMAC, Garden Grove, California, 11-14 February 2013.

Gencoğlu, C., Özgüven, H. N., “Optimal Placement of Piezoelectric Patches on a Cylindrical Shell for Active Vibration”, Topics in Modal Analysis, Volume 7, Part of the series Conference Proceedings of the Society for Experimental Mechanics Series, pp. 673-681, Springer, 31st IMAC, Garden Grove, California, 11-14 February 2013.

Tol, Ş., Özgüven, H. N., “Experimental Verification and Improvement of Dynamic Characterization Method for Structural Joints”, Topics in Modal Analysis, Volume 7, Part of the series Conference Proceedings of the Society for Experimental Mechanics Series, pp. 585-596, Springer, 31st IMAC, Garden Grove, California, 11-14 February 2013.

Beker, L., Özgüven, H.N., Külah, H., “Optimization of an Energy Harvester Coupled to a Vibrating Membrane”, Special Topics in Structural Dynamics, Volume 6, Part of the series Conference Proceedings of the Society for Experimental Mechanics Series, pp. 577-583, Springer, 31st IMAC, Garden Grove, California, 11-14 February 2013.

Canbaloğlu, G., Özgüven, H. N., “Obtaining Linear FRFs for Model Updating in Structures with Multiple Nonlinearities Including Friction”, Topics in Nonlinear Dynamics, Conference Proceedings of the Society for Experimental Mechanics Series, Volume 1, pp. 145-157, Springer, 31st IMAC, Garden Grove, California, 11-14 February 2013.

Koyuncu, A., Ciğeroğlu, E., Yümer, M. E., Özgüven, H. N., “Localization and Identification of Structural Nonlinearities Using Neural Networks”, Topics in Nonlinear Dynamics, Volume 1, Part of the series Conference Proceedings of the Society for Experimental Mechanics Series, pp..103-112, Springer, 31st IMAC, Garden Grove, California, 11-14 February 2013.

Aykan, M. and Özgüven, H. N. “Identification of Restoring Force Surfaces in Nonlinear MDOF Systems from FRF Data Using Nonlinearity Matrix”, Topics in Nonlinear Dynamics, Conference Proceedings of the Society for Experimental Mechanics Series, Volume 1, pp. 65-76, Garden Grove, California, 11-14 February 2013.

Karaağaçlı, T., Yıldız, E. N. and Özgüven, H. N., “A new method to determine dynamically equivalent finite element models of aircraft structures from modal test data”, Mechanical Systems and Signal Processing, v. 31, pp. 94–108, August 2012.

Karataş, H. Ç., Cigeroglu, E. and Özgüven, H. N., “On the Comparison of Possibilistic and Probabilistic Methods for the Determination of the Worst-Case Response of Mistuned Bladed Disks”, 10th International Conference on Vibrations in Rotating Machinery, IMechE London, UK, September 11-13, 2012.

Beker, L., Muhtaroğlu, A., Özgüven, H. N. and Külah, H., “Finite Element Modeling of MEMS Piezoelectric Energy Harvester”,Proceedings of Nanotech Modeling and Simulation of Microsystems 2012, v. 2, pp. 633-636, Santa Clara, California, June 18-21,2012.

Özşahin, O, Budak, E. and Özgüven, H. N., “Analytical Modelling of the Machine Tool Spindle Dynamics Under Operational Conditions”,37th MATADOR Conference, Manchester, July 25-27, 2012.

Budak, E., Tunç, L. T., Alan, S. and Özgüven, H. N., “Prediction of Workpiece Dynamics and Its Effects on Chatter Stability in Milling”,CIRP Annals – Manufacturing Technology, v. 61, n. 1, pp. 339–342, 2012.

Kalaycıoğlu, T. and Özgüven, H. N., “Nonlinear Structural Modification and Nonlinear Coupling”, Topics in Nonlinear Dynamics, Volume 3, Part of the series Conference Proceedings of the Society for Experimental Mechanics Series, pp. 225-237, Springer, 30th IMAC, Jacksonville, Florida,January 30 – February 2, 2012. (Later published in a journal in revised form)

Aykan, M. and Özgüven, H. N. “Parametric Identification of Nonlinearity from Incomplete FRF Data Using Describing Function Inversion”, Topics in Nonlinear Dynamics, Volume 3, Part of the series Conference Proceedings of the Society for Experimental Mechanics Series, pp. 311-322, Springer, 30th IMAC, Jacksonville, Florida, January 30 – February 2, 2012. (Later published in a journal in revised form)

Karataş, H. Ç., Cigeroglu, E. and Özgüven, H. N.,“Possibilistic Interpretation of Mistuning in Bladed Disks by Fuzzy Algebra”,Proceedings of the SEM IMAC XXX Conference, v.4, pp. 117-124, Jacksonville, Florida, January 30 – February 2, 2012.

Tol, Ş. and Özgüven, H. N., “Dynamic Characterization of Structural Joints Using FRF Decoupling”, Topics in Modal Analysis I, Volume 5, Part of the series Conference Proceedings of the Society for Experimental Mechanics Series, pp. 435-446, Springer, 30th IMAC, Jacksonville, Florida, January 30 – February 2, 2012. (Later published in a journal in revised form)

Kalaycıoğlu T. and Özgüven H. N., “Harmonic Response of Large Engineering Structures with Nonlinear Modifications”, Proceedings of the 8^th International Conference on Structural Dynamics, EURODYN 2011, Leuven, Belgium, pp.3623-3629, 4-6 July 2011.

Kalaycıoğlu, T. and Özgüven, H. N., “Harmonic Vibration Analysis of Large Engineering Structures with Nonlinear Modifications”, Proceedings of 15^th National Symposium on Theory of Machines, pp. 205-214, Güzelyurt, Niğde, June 16-18, 2011 (in Turkish).

Arslan, Ö., Aykan, M. and Özgüven, H. N., “Parametric Identification of Structural Nonlinearities from Measured Frequency Response Data”, Mechanical Systems and Signal Processing, v. 25, n. 4, pp. 1112-1125, May 2011.

Özşahin, O., Budak, E. and Özgüven, H. N. “Investigating Dynamics of Machine Tool Spindles under Operational Conditions”, Advanced Materials Research, v. 223, pp. 610-621, 2011.

Arslan, Ö., Aykan, M. and Özgüven, H. N., “Paramet

Özşahin, O., Budak, E. and Özgüven, H. N. “Investigating Dynamics of Machine Tool Spindles under Operational Conditions”, 13^th CIRP Conference on Modeling of Machining Operations, Sintra-Lisbon, Portugal, 12-13 May 2011.

Yumer, M. E., Cigeroglu, E. and Özgüven, H. N., “Model Updating with Neural Networks and Genetic Optimization”, Proceedings of the 29^th International Modal Analysis Conference, Jacksonville, Florida, January 31 – February 3, 2011.

Özgüven, H. N., “Revisiting a Novel Structural Modification Method for Linear and Nonlinear Dynamic Reanalysis of Machinery” (Key Lecture), AzCIFToMM 2010 – Proceedings of International Symposium of Mechanism and Machine Science, Izmir, Turkey, October 5-8, 2010.

Yümer, M. E., Ciğeroğlu, E. and Özgüven, H. N., “Robustness Analysis of Intentional Mistuning Patterns in Randomly Mistuned Bladed Disk Assemblies”, Proceedings of the 24^th ISMA International Conference on Noise and Vibration Engineering, pp. 4865-4874, Leuven, Belgium, September 20-22, 2010.

Demirkan, Ö., Başdoğan, İ., Özgüven. H. N. and Çalışkan, M., “Prediction of Vibro-Acoustic Response of Enclosed Spaces by Using Structural Modification Techniques”, Proceedings of the 24^th ISMA International Conference on Noise and Vibration Engineering, Leuven, Belgium, September 20-22, 2010.

Avşar, A. L., Özgüven, H. N., “Dynamic Modeling of Optical Systems in Order to Study Vibration Effect on Performance”, Current Developments in Lens Design and Optical Engineering XI; and Advances in Thin Film Coatings VI., Edited by Johnson, R. Barry; Mahajan, Virendra N.; Thibault, Simon. Proceedings of the SPIE, v. 7786, pp. 77860U-77860U-12, 2010.

Kılıç, Z. M., Özgüven, H. N. and Altıntaş, Y., “Effects of Cubic Nonlinearity of Bearing on FRF of Spindle System and on Stability of Cutting Process”, Proceedings of 14^th International Conference on Machine Design and Production, Güzelyurt, Turkish Republic of Northern Cyprus, June 29 – July 02 2010.

Yümer, M. E., Ciğeroğlu, E. and Özgüven, H. N., “ Non-Linear Forced Response Analysis of Mistuned Bladed Disk Assemblies”,Proceedings of ASME Turbo Expo 2010: Power for Land, Sea and Air, Glasgow, Scotland, June 14-18, 2010,

Yümer, M. E., Ciğeroğlu, E. and Özgüven, H. N., “Mistuning Identification of Bladed Disks Utilizing Neural Networks”, Proceedings of ASME Turbo Expo 2010: Power for Land, Sea and Air, Glasgow, Scotland, June 14-18, 2010,

Özşahin, O., Özgüven, H. N. and Budak, E., “Analysis and Compensation of Mass Loading of Accelerometers on Tool Point FRF Measurements for Chatter Predictions”, International Journal of Machine Tools and Manufacture, v. 50, n. 6, pp. 585-589, June 2010.

Alan, S., Budak, E. and Özgüven, H. N., “Analytical Prediction of Part Dynamics for Machining Stability Analysis”, International Journal of Automation Technology (special issue on Modeling and Simulation of Cutting Process), v. 4, n. 3, May 2010.

Bediz, B., Özgüven, H. N. and Korkusuz, F., “Vibration Measurements Predict the Mechanical Properties of Human Tibia”, Clinical Biomechanics, v. 25, pp. 365-371, May 2010.

Karaağaçlı, T., Yıldız, E. N. and Özgüven, H. N., “Determination of Dynamically Equivalent FE Models of Structures from Experimental Data”, Structural Dynamics, Volume 3, Part of the series Conference Proceedings of the Society for Experimental Mechanics Series, pp. 785-799, Springer, 28th IMAC, Jacksonville, February 1-4, 2010. (Later published in a journal in revised form)

Başdoğan, İ., Canbaloğlu, G., Kamcı, G. and Özgüven, H. N., “A Structural Modification Methodology Adapted to a Vibro-Acoustic Model to Improve the Interior Noise”, EURONOISE 2009, Edinburgh, Scotland, October 26-28, 2009.

Kozak, M., Öztürk, M. and Özgüven, H. N., “A Method in Model Updating Using Miscorrelation Index Sensitivity”, Mechanical Systems and Signal Processing, v. 23, pp. 1747-1758, 2009.

Özer M. B., Özgüven H. N. and Royston,T. J.,“Identification of Structural Non-linearities Using Describing Functions and the Sherman-Morrison Method”, Mechanical Systems and Signal Processing, v. 23, pp. 33-44, 2009.

Arslan, Ö. and Özgüven, H. N., “The Use of Variable Modal Parameters in Harmonic Analysis of Nonlinear Structures”, Proceedings of 14^th National Symposium on Theory of Machines, pp. 293-301, Güzelyurt, Northern Cyprus Turkish Republic, July 2-4, 2009 (in Turkish).

Avşar, A. L. and Özgüven, H. N., “A Dynamic Model for Vibration Analysis of a Simple Optical System”, Proceedings of 14^th National Symposium on Theory of Machines, pp. 283-293, Güzelyurt, Northern Cyprus Turkish Republic, July 2-4, 2009 (in Turkish).

Aytekin, B. and Özgüven, H. N., “An Analytical Model Approach for Vibration Analysis of Printed Circuit Boards”, Proceedings of 14^thNational Symposium on Theory of Machines, pp. 225-233, Güzelyurt, Northern Cyprus Turkish Republic, July 2-4, 2009 (in Turkish).

Canbaloğlu, G. and Özgüven, H. N., “Structural Modification Method for Distributed Structures – Applications and Its Importance”,Proceedings of 14^th National Symposium on Theory of Machines, pp. 201-213, Güzelyurt, Northern Cyprus Turkish Republic, July 2-4, 2009 (in Turkish).

Özşahin, O., Özgüven, H. N. and Budak, E., “Mass Loading Effect of Accelerometers on Tool Point FRF and Stability Diagrams”,Proceedings of the 12^th CIRP Conference on Modeling of Machining Operations, San Sebastian, Spain, May 12-13, 2009.

Canbaloğlu, G. and Özgüven, H. N., “Structural Modifications with Additional DOF – Applications to Real Structures”, Proceedings of the 27^th International Modal Analysis Conference, Orlando, Florida, February 4-7, 2009.

Özşahin, O., Ertürk, A, Özgüven, H. N. and Budak, E., “A closed-form approach for identification of dynamical contact parameters in spindle-holder-tool assemblies”, International Journal of Machine Tools and Manufacture, v. 49, pp. 25-35, 2009.

Aytekin, B. and Özgüven, H. N., “Vibration Analysis of a Simply Supported PCB with a Component– An Analytical Approach”, 10^thElectronics Packaging Technology Conference (EPTC 2008), Singapore, December 9-12, 2008.

Özşahin, O., Özgüven, H. N. and Budak, E., “Estimation of Dynamic Contact Parameters for Machine Tool Spindle-Holder-Tool Assemblies Using Artificial Neural Networks”, Proceedings of the 3^rd International Conference on Manufacturing Engineering (ICMEN), pp. 131-144, Chalkidiki, Greece, November 1-3, 2008.

Orbay, G. and Özgüven, H. N., “Non-linear Periodic Response Analysis of Mistuned Bladed Disk Assemblies in Modal Domain”,Proceedings of 9^th International Conference on Vibrations in Rotating Machinery, v. 1, pp. 159-170, IMechE, University of Exeter, UK, September 8-10, 2008.

Atlar, S., Budak, E. and Özgüven, H. N., “Modeling Part Dynamics and Chatter Stability in Machining Considering Material Removal”,Proceedings of 1^st International Conference on Process Machine Interactions, pp. 61-72, Hannover, Germany, September 3-4, 2008.

Arslan, Ö. and Özgüven, H. N., “Modal Identification of Non-Linear Structures and the Use of Modal Model in Structural Dynamic Analysis”, Proceedings of the 26^th International Modal Analysis Conference, Orlando, Florida, February 4-7, 2008.

Bediz, B., Özgüven, H. N. and Korkusuz, F., “Measuring Structural Dynamic Properties of Human Tibia by Modal Testing”, Proceedings of the 26^th International Modal Analysis Conference, Orlando, Florida, February 4-7, 2008.

Gürkan, E. and Özgüven, H. N., “Interactions Between Backlash and Bearing Clearance Nonlinearity in Geared Flexible Rotors”,Proceedings of IDETC/PTG 2007 ASME 2007 International Design Engineering Technical Conferences, Las Vegas, Nevada, September 4-7, 2007.

Kozak, M. T., Cömert, M. D., Özgüven, H. N., “Investigation of Model Updating Techniques Used in Vibration Analysis and Their Applications to Real Structures”, Proceedings of 13^th National Symposium on Theory of Machines, v.1, pp. 83-90, Sivas, June 7-9, 2007 (in Turkish).

Arslan, Ö. and Özgüven, H. N., “A New Approach for Modal Identification of Nonlinear Structures and for Response to Harmonic Excitation”, Proceedings of 13^th National Symposium on Theory of Machines, v. 2, pp. 371-378, Sivas, June 7-9, 2007 (in Turkish).

Gürkan, N. E. and Özgüven, H. N., “Mathematical Modeling and Dynamic Analysis of Gear-Rotor-Bearing Systems Including Bearing Clearance”, Proceedings of 13^th National Symposium on Theory of Machines, v. 2, pp. 465-475, Sivas, June 7-9, 2007 (in Turkish).

Köksal, S., Cömert, M. D and, Özgüven, H. N., “Software Developed for Dynamic Analysis of Structures With Local Structural Modification and Its Application to Aircraft Structures”, Proceedings of 13^th National Symposium on Theory of Machines, v. 2, pp. 477-488, Sivas, June 7-9, 2007 (in Turkish).

Kozak, M. T., Cömert, M. D. and Özgüven, H. N., “A Model Updating Routine Based on the Minimization of a New Frequency Response Based Index for Error Localization”, Proceedings of the 25^th International Modal Analysis Conference, Orlando, Florida, February 19-22, 2007.

Köksal, S, Cömert, M. D., Özgüven, H. N., “Comparison and Application of Reanalysis Methods”, Proceedings of the 25^th International Modal Analysis Conference, Orlando, Florida, February 19-22, 2007.

Ertürk, A., Özgüven, H. N. and Budak, E., “Effect Analysis of Bearing and Interface Dynamics on Tool Point FRF for Chatter Stability in Machine Tools by using a New Analytical Model for Spindle-Tool Assemblies”, International Journal of Machine Tools and Manufacture, v. 47, n.1, pp. 23-32, 2007.

Ertürk, A., Budak, E. and Özgüven, H.N., “Selection of Design and Operational Parameters in Spindle-Holder-Tool Assemblies for Maximum Chatter Stability by Using a New Analytical Model”, International Journal of Machine Tools and Manufacture, v. 47, pp. 1401-1409, 2007. (Also appeared in the Proceedings of the 2^nd CIRP Conference on High Performance Cutting, Vancouver, BC Canada, 12-13 June 2006).

Ertürk, A., Özgüven, H. N. and Budak, E., “Dynamic Analysis in Machine Centers and Machining Stability: Applications of a New Analytical Method”, Journal of Mechanical Design and Production, v. 8, n.2, pp. 55-66, 2006 (in Turkish).

Budak, E., Ertürk, A., and Özgüven, H. N., “A Modeling Approach for Analysis and Improvement of Spindle-Holder-Tool Assembly Dynamics”, CIRP Annals – Manufacturing Technology, vol. 55, n. 1, pp. 369-372, 2006.

Ertürk, A., Özgüven, H. N. and Budak, E., “Analytical Modeling of Spindle-Tool Dynamics on Machine Tools using Timoshenko Beam Model and Receptance Coupling for the Prediction of Tool Point FRF”, International Journal of Machine Tools and Manufacture, v. 46, n. 15, pp. 1901-1912, 2006.

Ciğeroğlu, E. and Özgüven, H. N., “Non-linear Vibration Analysis of Bladed Disks with Dry Friction Dampers”, Journal of Sound and Vibration, v.295, pp. 1028-1043, 2006.

Köksal, S., Cömert, M. D. and Özgüven, H. N., “Reanalysis of Dynamic Structures Using Successive Matrix Inversion Method”,Proceedings of the 24^th International Modal Analysis Conference, St. Louis, Missouri USA, January 30 – February 2, 2006.

Özgüven, H. N., “Contribution of Technoparks to Universities and Engineering Education”, Proceedings of the Symposium on Engineering Education 2005, pp. 157-164, Ankara, November 18-19, 2005 (in Turkish).

Ertürk, A., Budak, E. and Özgüven, H. N. “Dynamic Modeling of Spindle – Tool Holder – Tool Assembly in Machining Centers”,Proceedings of 12. National Symposium on Theory of Machines, v. 1, pp.15-26, Kayseri, June 9-11, 2005 (in Turkish).

Aydoğan, M. Ö. and Özgüven, H. N. “Crack Detection In Structures By Using Vibration Measurements”, Proceedings of 12. National Symposium on Theory of Machines, v. 1, pp.225-234, Kayseri, June 9-11, 2005 (in Turkish).

Özer, M. B., Özgüven, H. N. and Royston, T. J. “Identification of Structural Non-linearities Using Describing Functions and Sherman-Morrison Method”, Proceedings of the 23^rd International Modal Analysis Conference, pp.199-212, Orlando, Florida, January 30 – February 3, 2005.

Doğruer, C. U. and Özgüven, H. N., “Dynamic Analysis of Spur Gears on Elastic Bearings and Shafts: Effect of Transverse Shaft and Bearing Flexibility Interacting with Backlash”, Proceedings of 11^th International Conference on Machine Design and Production, pp.759-770, Antalya, October 13-14, 2004.

Cömert, M. D. and Özgüven, H. N., “Investigation of the Effects of Launcher Dynamics on Launch Errors in Rocket Systems”, Proceedings of Defense Technologies Conference – SAVTEK 2004, v.1, pp.39-47, Ankara, Turkey, June 24-25, 2004 (in Turkish).

Maliha, R., Doğruer, C. U. and Özgüven, H. N., “Nonlinear Dynamic Modeling of Gear – Shaft – Disk – Bearing Systems Using Finite Elements and Describing Functions”, ASME Journal of Mechanical Design, v.126, n.3, pp.528-534, May 2004.

Maliha, R., Doğruer, C. U. and Özgüven, H. N., “Nonlinear Dynamic Modeling of Gear – Shaft – Disk – Bearing Systems Using Finite Elements and Describing Functions”, Proceedings of the 9^th International Power Transmission and Gearing Conference, Chicago, Illinois, September 3-5, 2003 – Later published in a journal in revised form.

Özer, M. B. and Özgüven, H. N., “A New Method for Localization and Identification of Non-Linearities in Structures”, Proceedings of ESDA 2002: 6^th Biennial Conference on Engineering Systems Design and Analysis, ASME, İstanbul, Turkey, July 8-11, 2002.

Özgüven, H. N., “Twenty Years of Computational Methods for Harmonic Response Analysis of Non-Proportionally Damped Systems”,Proceedings of the 20^th International Modal Analysis Conference, v.1, pp. 390-396, Los Angeles, February 2002.

Özgüven, H. N., “Science and Technology Policies of Turkey at the Beginning of 21^st Century”, Congress on Science, Technology and Industry Policies of Turkey in 21^st Century, İstanbul, 8 December 1999 (in Turkish).

Özgüven, H. N., “Science and Technology Policy of Turkey and Technoparks as Institutions of National Innovation System”, (Invited Paper), 16^th World Conference on Science and Technology Parks, Istanbul, 31 August – 4 September, 1999.

Kuran, B., Önen, C. and Özgüven, H.N. “Effects Of Aeroelasticity on the Stability of Unguided Missiles”, CEAS International Forum on Aeroelasticity and Structural Dynamics, Rome, Italy, June 1997.

Kuran, B. and Özgüven, H. N., “A Modal Superposition Method for Nonlinear Structures”, Journal of Sound and Vibration, v.189, n.3, pp.315-339, 1996.

Cömert, M.D. and Özgüven, H.N., “A Method for Forced Harmonic Response of Substructures Coupled by Nonlinear Elements”,Proceedings of the 13th International Modal Analysis Conference, Nashville, Tennessee, pp. 139-145, February 1995.

Tahtalı, M. and Özgüven, H. N., “Vibration Analysis of Dynamic Structures Using A New Structural Modification Method”, 6th International Machine Design and Production Conference Proceedings, pp. 511-520, METU, Ankara, September 21-23, 1994.

Özgüven, H.N., “Integration of Defence Industry with Civil Industry and Catching up with Technology in 2000’s”, Turkish Defence Industry Seminar, Ankara, September, 13, 1993 (in Turkish).

Şener, Ö. S. and Özgüven, H. N., “Dynamic Analysis of Geared Shaft Systems By Using A Continuous System Model”, Journal of Sound Vibration, v.166, n.3, pp. 539-556, September 1993.

Tanrıkulu, Ö., Kuran, B., Özgüven, H. N. and Imregün, M., “Forced Harmonic Response Analysis of Nonlinear Structures Using Describing Functions”, AIAA Journal, v.31, n.7, pp. 1313-1320, July 1993.

Özgüven, H. N. and İmregün, M., “Complex Modes Arising from Linear Identification of Non-Linear Systems”, The International Journal of Analytical and Experimental Modal Analysis, v.8, n.2, pp. 151-164, April 1993.

Budak, E., and Özgüven, H. N. “Iterative Receptance Method for Determining Harmonic Response of Structures with Symmetrical Non-Linearities”, Mechanical Systems and Signal Processing, v.7, n.1, pp. 75-87, January 1993.

Özgüven, H. N. and Kesan, M., “Dynamic Analysis of Helical Gears”, Proceedings of the Fifth National Congress on Machine Design and Production, pp. 241-251, METU, Ankara, September 1992 (in Turkish).

Tanrıkulu, Ö., Kuran, B., Özgüven, H. N. and Imregün, M., “Harmonic Response Analysis of Non-Linear Structures: The Describing Function Approach”, Proceedings of 10th Anniversary Symposium of Aeronautical Engineering Department, pp. 335-344, METU, Ankara, June 22-26, 1992.

Kahraman, A., Özgüven, H. N., Houser, D. R. and Zakrajsek, J., “Dynamic Analysis of Geared Rotors by Finite Elements”, ASME Journal of Mechanical Design, v. 114, pp. 507 – 514, September 1992.

Güler, H. C. and Özgüven, H. N., “Dynamic Simulation of Human Impact Landing”, Proceeding of the 1992 Engineering Systems Design and Analysis, PD-Vol. 47-2, Bioengineering, pp. 87-94, İstanbul, June 29 – July 3, 1992.

Özgüven, H. N. and Kesan, M., “Dynamic Response of Geared Rotors to Internal Excitation by Using a Finite Element Model”,Proceedings of 3rd World Congress on Gearing and Power Transmissions, Paris, February 12-14, 1992.

Özgüven, H. N. and Yalçıntaş, M., “Effect of Operating Speed in Diagnosis of Gear Faults”, 13th ASME Vibration Conference, Miami, Florida, September 22-25, 1991

Güler, H. C. and Özgüven, H. N., “Dynamic Modelling of Human Jumping from a Height”, Proceedings of the Fifth National Symposium on Theory of Machine, pp. 21-32, Bursa, September 21-22, 1991 (in Turkish).

Kesan, M and Özgüven, H.N., “Dynamic Analysis of Shaft-Gear Systems by Finite Element Method.” Proceedings of the Fifth National Symposium on Theory of Machine, pp. 357-365, Bursa, September 21-22, 1991 (in Turkish).

Özgüven, H. N., “Assessment of Some Recently Developed Mathematical Models in Gear Dynamics”, Proceedings of 8th World Congress on Theory of Machines and Mechanisms, Prague, Czechoslovakia, August 26-31, 1991.

Budak, E. and Özgüven, H. N., “Harmonic Vibration of Non- Linear Structures with Local Non-Linearities and the Study of the Validity of Some Linearization Techniques”, Proceedings of the Fourth International Conference on Recent Advances in Structural Dynamics, Southampton, England, July 15-18, 1991.

Tanrıkulu, Ö. and Özgüven, H. N., “A New Method for the Identification of Non-Linearities in Vibrating Structures”, Proceedings of the Fourth International Conference on Recent Advanced in Structural Dynamics, Southampton, England, July 15-18, 1991.

Özgüven, H. N., İmregün, M. and Kuran B., “Complex Modes Arising from Linear Identification of Non-linear Systems”, Proceedings of the 9th International Modal Analysis Conference, Florence, Italy, pp.644-650, April 15-18, 1991. -Later published in a journal in revised form.

Özgüven, H. N., “A Nonlinear Mathematical Model for Dynamic Analysis of Spur Gears Including Shaft and Bearing Dynamics”, Journal of Sound and Vibration, v.145, n.2, pp.239-260, May 1991.

Budak, E. and Özgüven, H. N., “A New Method for Harmonic Vibration Analysis of Nonlinear Systems”, Proceedings of Fourth National Symposium on Theory of Machines, pp.271-284, Yalova, İstanbul, September 22-24, 1990(in Turkish).

Şener, Ö. S. and Özgüven, H. N., “Determining Dynamic Loads and Dynamic Factors in Gears by Using a Continuous System Model”,Proceedings of Fourth National Symposium on Theory of Machines, pp.167-182, Yalova, İstanbul, September 22-24, 1990 (in Turkish).

Özgüven, H. N., “Effects of Shaft and Bearing Dynamics on Gear Dynamics in Geared Systems”, Proceedings of Fourth National Symposium on Theory of Machines, pp.1-12, Yalova, İstanbul, September 22-24, 1990 (in Turkish).

Budak, E. and Özgüven, H. N., “A Method for Harmonic Response of Structures with Symmetrical Nonlinearities”, Proceedings of the 15th International Seminar on Modal Analysis and Structural Dynamics, v.2, pp.901-915, Leuven, Belgium, September 17-21, 1990.

Şener, Ö. and Özgüven, H. N., “Critical Speeds of Geared Rotors by Including Mesh Stiffness and Using a Continuous System Model”,Advances in Design Automation, ASME, DE- Vol. 23-2, pp.429-435, Chicago, September 16-19, 1990.

Özgüven, H. N., “Structural Modifications Using Frequency Response Functions”, Mechanical Systems and Signal Processing, v.4., n.1, pp.53-63, 1990.

Budak, E. and Özgüven, H. N., “A Dynamic Analysis Method for Harmonically Excited Nonlinear Structures”, Structural Vibration and Acoustics, ASME, DE-Vol, 18-3, pp.23-29, 1989.

Kahraman, A., Özgüven, H. N., Houser, D. R. and Zakrajsek, J., “Dynamic Analysis of Geared Rotors with Finite Elements”, Proceedings of Fifth International Power Transmission and Gearing Conference, ASME, v.1, pp.375-382, Chicago, April 1989, Also published asNASA Technical Memorandum 102349, AVSCOM Technical Memorandum 89-C-006 January 1990. (Later published in a journal in revised form)

Özgüven, H. N. and Berme, N., “An Experimental and Analytical Study of Impact Forces during Human Jumping”, Journal of Biomechanics, v.21, n.12, pp.1061-1066, 1988.

Özgüven, H. N., “A New Method for the Dynamic Analysis of a Non-Proportionally Damped System and Its Application to Structural Modification to Structural Modification Problems”, Proceedings of the Third National Symposium on Theory of Machines, pp. 254-263, Foça, İzmir, October 12-14, 1988 (in Turkish).

Budak, E. and Özgüven, H. N., “Application of a New Method for the Dynamic Analysis of Nonlinear Structures”, Proceedings of the Third National Symposium on Theory of Machines, pp. 356-368 Foça, İzmir, October 12-14, 1988 (in Turkish).

Şener, Ö. S. and Özgüven, H. N., “Dynamic Analysis of Gears by Using Continuous System Models”, Proceedings of the Third National Symposium on Theory of Machine, pp.554-569, Foça, İzmir, October 12-14, 1988 (in Turkish).

Özgüven, H. N., “Structural Modifications Using Receptances”, Proceedings of the 13th International Seminar on Modal Analysis, C-27, Leuven, Belgium, September 19-23, 1988.

Özgüven, H. N., “Computer Aided Dynamic Analysis of Gears”, Proceedings of the Third National Congress on Machine Design and Production, pp.89-103, Ankara, September 21-23, 1988 (in Turkish).

Özgüven, H. N. and Houser, D. R., “Dynamic Analysis of High Speed Gears by Using Loaded Static Transmission Error”, Journal of Sound and Vibration, v.125, n.1, pp.71-83, August 1988.

Çalışkan, M. and Özgüven, H. N., “Industrial Noise Control, Noise Control Acts and International Standards”, Proceedings of the 2nd National Conference on Worker’s Health, Ankara, Turkey, pp. 368-372 April 4-7, 1988 (in Turkish).

Özgüven, H. N. and Çalışkan, M., “Choosing the Best Methods Applicable in Industrial Noise Control”, Proceedings of the 2nd National Conference on Worker’s Health, Ankara, Turkey, pp. 364-367 April 4-7, 1988 (in Turkish).

Özgüven, H. N. and Houser, D. R., “Mathematical Models Used in Gear Dynamics – A Review”, Journal of Sound and Vibration, v.121, n.3, pp.383-411, March 1988.

Özgüven, H. N., “Computation of the Critical Speeds of Rotors”, Mühendis ve Makina (Engineer and Machine), v.29, n.332, pp.25-34, September 1987 (in Turkish).

Özgüven, H. N., “On the Harmonic Response of Non- Proportionally Damped Structures”, The Role of Damping in Vibration and Noise Control, (Ed. L. Rogers), ASME, DE-Vol.5, pp.117-124, September 1987.

Özgüven, H. N. and Houser, D. R., “Gear Dynamic Models Used in Noise Analysis”, (Invited paper), Proceedings of Noise-Con 87, pp.47-52, Penn State, State College, June 8-10, 1987.

Özgüven, H. N., “A New Method for Harmonic Response of Non- proportionally Damped Structures Using Undamped Modal Data”,Journal of Sound and Vibration, v.117, n.2, pp.313-328, September 1987.

Özgüven, H. N., “The Effect of Damping on the In-phase and Out-of-phase Components of Harmonic Response in Damped Structures”,Proceedings of the Fifth International Modal Analysis Conference, v.2, pp.1015-1021, Imperial College, London, England, April 6-9, 1987.

Fronk, D. M., Özgüven, H. N. and Berme, N., ”Impact Forces during Jumping”, Proceedings of the ASME Winter Annual Meeting, Anaheim, California, December 7-12, 1986.

Özgüven, H. N. and Çandır, B., “Suppressing the First and Second Resonances of Beams by Dynamic Vibration Absorbers”, Journal of Sound and Vibration, v.111, n.3, pp.377-390, October 1986.

Çalışkan, M. and Özgüven, H. N., “Noise Control and Ranking of Noise Sources in Power Plants”, Proceedings of the Second National Congress on Machine Design and Production, pp.189-197, Ankara, September 17-19, 1986 (in Turkish).

Kahraman, A., Çalışkan, M. and Özgüven, H. N., “Dynamic Analysis of Textile Spinning Spindles”, Proceedings of the Second National Symposium on Theory of Machine, pp. 479-489, Gaziantep, September 22-24, 1986 (in Turkish).

Kahraman, A., Çalışkan, M. and Özgüven, H. N., “Dynamics of Textile Spinning of Spindles and Rotors”, Proceedings of the International Conference on Rotor dynamics, pp. 547-551, Tokyo, Japan, September 14-17, 1986.

Çalışkan, M. and Özgüven, H. N., “Ranking and Control of Noise Sources in a Power Plant”, Proceedings of the Inter-Noise-86, pp.337-342, MIT, Boston, July 21-23, 1986.

Özgüven, H. N., “A Study on Non-Proportionally Damped Beams”, Proceedings of the Fourth International Modal Analysis Conference, v.2, pp.1081-1087, Los Angeles, California, February 3-6, 1986.

Özgüven, H. N., “The Use of the Vibration Analysis Program Package in Machine Design”, Proceedings of the First National Congress on Machine Design and Production, pp. 199-204, Ankara, Turkey, Sept. 19-21, 1984 (in Turkish).

Çandır, B. and Özgüven, H. N., “Dynamic Vibration Absorbers for Reducing Resonance Amplitudes of Hysteretically Damped Beams”,Proceedings of the Fourth International Modal Analysis Conference, v.2, pp.1628-1635, Los Angeles California, February 3-6, 1986.

Özgüven, H. N., and Çalışkan, M., “Industrial Noise and Vibration Control”, Mühendis ve Makina (Engineer and Machine), v.27, n.312, pp.24-27, January 1986 (in Turkish).

Özgüven, H. N., and Yaman, Y., “Modal Identification of Damped Structures from Response Measurements”, Proceedings of the Third International Modal Analysis Conference, Orlando, Florida, January 28-31, 1985.

Çalışkan, M., and Özgüven, H. N., “Noise Control in Production Plants – A Case Study”, Proceedings of the First National Congress on Machine Design and Production, pp.385-394, Ankara, Turkey, Sept. 19-21, 1984 (in Turkish).

Yaman, Y., and Özgüven, H. N., “A Method for the Identification of Damped Structures from Vibration Measurements”, Proceedings of the First National Symposium on Theory of Machines, pp.309-320, Ankara, Turkey, Sept. 12-14, 1984 (in Turkish).

Çandır, B., and Özgüven, H. N., “Dynamic Vibration Absorbers for Cantilever Beams”, Proceedings of the First National Symposium on Theory of Machines, pp.297-308, Ankara, Turkey, Sept. 12-14, 1984 (in Turkish).

Botsalı, F. M., and Özgüven, H. N., “Free and Forced Vibrations of Continuous Beams on Elastic Supports”, Proceedings of the First National Symposium on Theory of Machines, pp.283-296, Ankara, Turkey, Sept. 12-14, 1984 (in Turkish).

Özgüven, H. N., “Determination of Receptances of Locally Damped Structures”, Proceedings of the Second International Conference on Recent Advances in Structural Dynamics, v.2, pp.887-892, Southampton, England, April 9-13, 1984.

Özgüven, H. N., and Özkan, Z. L., “Whirl Speeds and Unbalance Response of Multi-bearing Rotors Using Finite Elements”, Transactions of ASME: Journal of Vibration, Acoustics, Stress and Reliability in Design, v.106, n.1, pp.72-79, January 1984.

Özgüven, H. N., “On the Critical Speed of Continuous Shaft-Disk Systems”, Transactions of ASME: Journal of Vibration, Acoustics, Stress and Reliability in Design, v.106, n.1, pp.56-61, January 1984.

Özkan, Z. L., and Özgüven, H. N., “Dynamic Analysis of Rotor Bearing Systems Using Finite Elements”, 3rd National Mechanics Congress, Kirazlıyayla, Bursa, September 1983. (in Turkish).

Özgüven, H. N., “An Approximate Method for the Vibration Analysis of Non-Classically Damped Mechanical Structures”, 3rd National Mechanics Congress, Kirazlıyayla, Bursa, September 1983 (in Turkish).

Erden, A., Akkök, M., Özgüven, H. N., and Platin, B. E., “Pulverized Coal Preparation Plants and a Proposed System”, Mühendis ve Makina (Engineer and Machine), v.24, n.282, pp.6-14, April 1983 (in Turkish).

Özgüven, H. N., “Receptances of Non-Proportionally and Continuously Damped Plates-Reduced Dampers Method”, Journal of Sound and Vibration, v.85, n.3, pp.383-395, December 1982.

Özgüven, H. N., and Semercigil, S. E., “Accuracy of Modal Approximations for Dynamic Response Analysis of Non-Proportionally Damped Mechanical Structures”, Proceedings of the First International Modal Analysis Conference, pp.662-670, Orlando, Florida, November 8-10, 1982.

Özgüven, H. N., “Mathematical Modelling for Dynamic Response Analysis of Partially Coated or Laminated Plates-An Energy Approach”,Mecanique Materiaux Electricite’, n.389-390-391, pp.282-286, May-June-July, 1982.

Özgüven, H. N., “Dynamic Analysis and Design of Vibratory Conveyors and Sieves”, Mühendis ve Makina (Engineer and Machine), v.24, n.275, pp.3-11, March 1982 (in Turkish).

Özgüven, H. N., “Modal Analysis of Non-Proportionally Damped Mechanical Structures”, ASME Paper No: 81-DET-75, ASME 8th Vibrations Conference, Hartford, Connecticut, September, 20-23, 1981.

Özgüven, H. N., and Cowley, A., “Receptances of Non-Proportionally and Continuously Damped Plates-Equivalent Dampers Method”,Journal of Sound and Vibration, v.76, n.1, pp. 23-41, May 1981.

Özgüven, H. N., “Equivalent Discrete Damping Inserts for Laminated Plates”, Proceedings of the AIAA/ASME/ASCE/AHS 22nd Structures, Structural Dynamics and Material Conference, pp.267-272, Atlanta, Georgia, April 6-8, 1981.

Özgüven, H. N., “Numerical Analysis of the Motion of a Particle on a Vibratory Table”, Proceedings of TÜBİTAK VIIth Science Congress, Mechanical Engineering Section, TÜBİTAK Publications No:537, pp.49-60, Kuşadası, Aydın, Turkey, September 29-Oct. 3, 1980 (in Turkish).

Özgüven, H. N., “An Investigation on the Motion of Bulk Material on Vibratory Conveyors and Sieves”, ODTÜ Uygulamalı Araştırmalar Dergisi (METU Journal of Applied Research), v.2, n.7, pp.35-46, 1980 (in Turkish).