JOURNALS

• Y.D.A. Erdem, U. Akyuz, A. Turer, B. Erdil, and N.S. Guchan, “Seismic Resistance Evaluation of Traditional Ottoman Timber-Frame Hımış Houses: Frame Loadings and Material Tests”, Earthquake Spectra, (accepted for publication).
• G. Ozdemir, and U. Akyuz, “Dynamic Analyses of Isolated Structures under Bi-directional Excitations of Near-field Ground Motions”, Shock and Vibration, 19, 505-513, (2012).
• B. Erdil, U. Akyuz, and I.O. Yaman, “Mechanical Behavior of CFRP Confined Low and Medium Strength Concrete Subjected to Simultaneous Heating-Cooling Cycles and Sustained Loading”, Materials and Structures, 45, 223-233, (2012).
• C. Ozkaya, U. Akyuz, A. Caner, M. Dicleli, and S. Pınarbasi, “Development of a new rubber seismic isolator ‘Ball Rubber Bearing’”, Earthquake Engineering and Structural Dynamics, 40, 1337-1352, (2011).
• D.Y.A. Erdem, A. Turer, B. Erdil, U. Akyuz, and N.S. Guchan, “Testing and Seismic Capacity Evaluation of a Typical Traditional Ottoman Timber Frame”, Advanced Materials Research, 133-134, 629-634, (2010).
• I. Erdem, U. Akyuz, “Analytical Investigation of Lateral Stregth of Masonry Iinfilled RC Frames Retrofitted with CFRP“, ASCE’s Journal of Performance of Constructed Facilities, 24, 302-310, (2010).
• U. Akyuz, ‘Alternatif Tasarım Yöntemi: Sismik Temel İzolasyonu”, Binalar için Deprem Mühendisliği Temel İlkeler, ed. E. Canbay, U. Ersoy, G. Özcebe, H. Sucuoğlu ve S.T. Wasti, (2008). (in Turkish)
• S. Pinarbasi, Y. Mengi, and U. Akyuz, , “Compression of solid and annular circular discs bonded to rigid surfaces“, International Journal Solids and Structures, 45, 4543-4561, (2008).
• C. Soyarslan, A. E. Tekkaya, and U. Akyuz, “Application of Continuum Damage Mechanics in discontinuous crack formation: Forward extrusion chevron predictions“, Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 88, 436-453, (2008).
• U. Akyuz, “Strengthening of RC Beams with FRPs, Retrofitting of Concrete Structures by Externally Bonded FRP”, fib Bulletin, 35, 41-51, (2006).
• G. Ozdemir, and U. Akyuz, “Tensile Capacities of CFRP Anchors“, Advances in Earthquake Engineering for Urban Risk Reduction, ed. S.T. Wasti and G. Ozcebe, NATO Science Series IV Earth and Environmental Sciences, 66, 471-487, (2006).
• I. Erdem, U. Akyuz, U. Ersoy and G. Ozcebe, “An experimental study on two different strengthening techniques for RC frames“, Engineering Structures, 28, 1843-1851, (2006).
• S. Pinarbasi, U. Akyuz, and Y. Mengi, “A New Formulation for the Analysis of Elastic Layers Bonded to Rigid Surfaces“, International Journal Solids and Structures, 43, 4271-4296, (2006).
• S. Pinarbasi, and U. Akyuz, “Sismik İzolasyon ve Elastomerik Yastık Deneyleri”, TMMOB İnşaat Mühendisleri Odası Teknik Dergi, Cilt 16, Sayı 3, 3581-3598, (2005). (in Turkish)
• U. Akyuz, “Separation at the Interface of Nonlinearly Elastic Spinning Tube-Rigid Shaft Subjected to Circumferential Shear”, International Journal of Non-Linear Mechanics, 39, 1333-1341, (2004).
• U. Ersoy, G. Ozcebe, T. Tankut, U. Akyuz, E. Erduran, and I. Erdem, “Strengthening of Infill Walls with CFRP Sheets“, Seismic Assessment and Rehabilitation of Existing Buildings, ed. S.T. Wasti and G. Ozcebe, NATO Science Series IV Earth and Environmental Sciences, 29, 305-334, (2003).
• I. Erdem, U. Akyuz, U. Ersoy, and G. Ozcebe, G., “A Comparative Study on the Strengthening of RC Frames“, Seismic Assessment and Rehabilitation of Existing Buildings, ed. S.T. Wasti and G. Ozcebe, NATO Science Series IV Earth and Environmental Sciences, 29, 407-432, (2003).
• U. Akyuz, and A. Ertepinar, “Stability and Breathing Motions of Pressurized Compressible Hyperelastic Spherical Shells”, Journal of Sound and Vibration, 247, 293-304, (2001).
• R.M. Pidaparti, U. Akyuz, P.A. Naick and D.B. Burr, “Fatigue data analysis of canine femurs under four-point bending”, Bio-Medical Materials and Engineering, 10, 43-50, (2000).
• U. Akyuz, and A. Ertepinar, “Stability and Asymmetric Vibrations of Pressurized Compressible Hyperelastic Cylindrical Shells”, International Journal of Non-Linear Mechanics, 34, 391-404, (1999).
• J. Chen, U. Akyuz, L. Xu, and R.M.V. Pidaparti, “Stress Analysis of the Human Temporomandibular Joint”, Medical Engineering and Physics, 20, 565-572, (1998).
• U. Akyuz, and A. Ertepinar, “Breathing Motions and Loss of Stability of Pre-stressed Compressible Hyperelastic Cylindrical Shells”, International Journal of Engineering Science, 35, 1265-1275, (1997).

CONFERENCES

• G. Ozdemir, and U. Akyuz, “Performance of a Multi-Story Isolated Building Subjected to Bidirectional Excitations in Protection of Critical Equipments from Earthquake Hazard”, Proceedings of the 15th World Conference on Earthquake Engineering, paper no: 2390, Lisbon, Portugal, 2012.
• G. Ozdemir, and U. Akyuz, “Response of Isolated Buildings Under Bi-directional Excitations”, Proceedings of the World Congress on Advances in Structural Engineering and Mechanics, paper no:SM130-078, Seoul, South Korea, 2011.
• B.Erdil, U. Akyuz, and I.O. Yaman, “A Comparative Study of Force-deflection Relationship of FRP-confined Concrete Columns”, III ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering, Corfu, Greece, 2011.
• G. Ozdemir, U. Akyuz, “Response of Isolated RC Buildings Under Bi-directional Near-Fault Ground Motions”, CD of the 9th US National and 10th Canadian Conference on Earthquake Engineering, Toronto, Canada, 2010.
• N.E. Reyhanogullari, U. Akyuz, “Vertical Ground Motion Influence on Seismically Isolated & Unisolated Bridges”, 9th International Congress on Advances in Civil Engineering, Trabzon, Turkey, 2010.
• G. Ozdemir, A. Yakut, U. Akyuz, “Comparison of Responses of Existing 5-Story Isolated RC Frame Under Two Different Isolator Models ”, CD of the Sakarya International Symposium on Earthquake Engineering, paper no: 1402, Sakarya, Turkey, 2009.
• B. Erdil, U. Akyuz, I.O. Yaman, “Low Strength Concrete Columns with CFRP: Behavior Under Temperature Changes and Loads ”, CD of the 9th International Symposium on Fiber-Reinforced Polymer Reinforcement for Concrete Strcutures, paper no:330, Sydney, Australia, 2009.
• M.C. Genes, M. Bikce, S. Kacin, U. Akyuz, P. Gulkan, L. Abrahamczyk, J. Schwarz, “Building Monitoring for Seismic Risk Assessment (II): Instrumental Testing of RC Frame Structures and Analytical Reinterpretation of Response Characteristics”, CD of the 14th World Conference on Earthquake Engineering, paper no: 09-01-0173, Beijing, China, 2008.
• B. Erdil, U. Akyuz, and I.O. Yaman, “Behavior of CFRP Reinforced Members Under Temperature Changes”, CD of the 14th World Conference on Earthquake Engineering, paper no: 12-01-0021, Beijing, China, 2008.
• S. Pinarbasi, Y. Mengi, and U. Akyuz, “Compressive and Bending Behavior of Strip-shaped Fiber-reinforced Elastomeric Bearings”, CD of the 14th World Conference on Earthquake Engineering, paper no: 11-0024, Beijing, China, 2008.
• S. Pinarbasi, U. Akyuz, and Y. Mengi, “Effect of Reinforcement Flexibility on Compressive Behavior of Strip-Shaped Elastomeric Bearings”, 8th International Congress on Advances in Civil Engineering, Famagusta, North Cyprus, 2008.
• S. Pınarbaşı ve U. Akyüz, “Elastomerik Köprü Yastıklarının Düşük Sıcaklıklardaki Davranışları Üzerine Deneysel Bir Çalışma”, 1nci Köprü ve Viyadükler Sempozyumu, 423-434, Antalya, 2007.
• U. Akyuz, and E. Acar, “A Comparative Study for Seismically Isolated Buildings”, 8th Pacific Conference on Earthquake Engineering, Singapore, 2007.
• S. Pinarbasi, U. Akyuz, and G. Ozdemir, “An Experimental Study On Low Temperature Behavior of Elastomeric Bridge Bearings”, 10th World Conference on Seismic Isolation, Energy Dissipation and Active Vibrations Control of Structures, Istanbul, Turkey, 2007.
• S. Pinarbasi, U. Akyuz, and Y. Mengi , “Uniform Compression of Bonded Elastic Layers”, CD of The 4th International Conference on Earthquake Engineering, paper no: 126, Taipei, Taiwan, 2006.
• U. Akyuz, A. Yakut and M. S. Ozturk, “Effect of Masonry Infill Walls on the Lateral Behavior of Buildings”, CD of The First European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, 2006.
• U. Akyuz and A. Ertepinar, “Symmetric and Asymmetric Vibrations of Cylindrical Shells“, CD of The Seventh International Conference on Vibration Problems, Istanbul, Turkey, 2005.
• G. Ozdemir and U. Akyuz, “Tensile Capacities of CFRP Anchors”, ACI Special Publication, Vol. 230, pp 39 – 56, USA, 2005.
• S. Pinarbasi and U. Akyuz, “Bending Behavior of Infinite-Strip-Shaped Bonded Elastic Layers”, CD of the International Conference on Earthquake Engineering, paper no: E179, Skopje-Ohrid, Macedonia, 2005.
• S. Pinarbasi, G. Ozdemir and U. Akyuz, “An Experimental Study on Behavior of Low Shape Factor Rubber Bearings Under Large Compressions”, CD of the International Conference on Earthquake Engineering, paper no: E178, Skopje-Ohrid, Macedonia, 2005.
• S. Pinarbasi, U. Akyuz, “Evaluation of the “Pressure Method for the Linear Analysis of Elastomeric Bearings”, CD of the 9th World Seminar on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures, Kobe, Japan, 2005.
• S. Pınarbaşı ve U. Akyüz, “Çelik Plakalı Elastomerik Köprü Yastıklarının Düşük Sıcaklık Kayma Deneyleri”, Türkiye İnşaat Mühendisliği 17. Teknik Kongre ve Sergisi CD’si, bildiri numarası: 01-0066, İstanbul, 2004.
• S. Pinarbasi, U. Akyuz, “Investigation of Compressive Stiffness of Elastomeric Bearings”, 6th International Congress on Advances in Civil Engineering, 694-703, Istanbul, Turkey, 2004.
• I. Erdem, U. Akyuz, “Nonlinear Analyses of Two Strengthened Infilled RC Frames”, 6th International Congress on Advances in Civil Engineering, 306-314, Istanbul, Turkey, 2004.
• A. Turer, A. Yakut, U. Akyuz, “Building Damage Patterns in Bingol-Turkey After the May 1st, 2003 Earthquake”, 13th World Conference on Earthquake Engineering, paper no: 65, Vancouver, Canada, 2004.
• U. Akyuz, G. Ozdemir, “Mechanical Properties of CFRP Anchorages”, 13th World Conference on Earthquake Engineering, paper no: 3349, Vancouver, Canada, 2004.
• I. Erdem, U. Akyuz, U. Ersoy and G. Ozcebe, “Experimental and Analytical Studies on the Strengthening of RC Frames”, 13th World Conference on Earthquake Engineering, paper no: 673, Vancouver, Canada, 2004.
• G. Ozcebe, U. Ersoy, T. Tankut, U. Akyuz, E. Erduran, “Rehabilitation of Existing Reinforced Concrete Structures Using CFRP Fabrics”, 13th World Conference on Earthquake Engineering, paper no: 1393, Vancouver, Canada, 2004.
• Akyüz, U. ve Özdemir, G., “CFRP Ankrajların Mekanik Özelliklerinin Belirlenmesi”, TÜBİTAK-Yapı Mekaniği Laboratuvarları Toplantısı II, 159-162, Konya, 2003.
• Akyüz, U., Ersoy, U., Özcebe, G. ve Erdem, İ., “Betonarme Çerçevelerin Güçlendirilmesi”, TÜBİTAK-Yapı Mekaniği Laboratuvarları Toplantısı II, 153-158, Konya, 2003.
• Pınarbaşı, S. ve Akyüz, U., “Elastomerik Yastıkların Mekanik Özelliklerinin Belirlenmesi”, TÜBİTAK-Yapı Mekaniği Laboratuvarları Toplantısı II, 141-144, Konya, 2003.
• Çelik, O.C., Sucuoğlu, H., ve Akyüz, U., “Forced Vibration Testing of Reinforced Concrete Buildings”, Beşinci Ulusal Deprem Mühendisliği Konferansı CD’si, bildiri numarası: AT-095, İstanbul, 2003.
• A. Turer, U. Akyuz, A. Yakut, B. Yalim, “School Building Damage Assessment after Bingol Earthquake”, International Conference in Earthquake Engineering, Skopje-Ohrid, Macedonia, 2003.
• S. Pinarbasi, U. Akyuz, “Seismic Base Isolation: Philosophy, Development and Applications”, International Conference in Earthquake Engineering, Skopje-Ohrid, Macedonia, 2003.
• Özcebe, G., Ersoy, U., Tankut, T., Akyüz, U., Erduran, E., Keskin, R.S., ve Mertol, C., “Mevcut Betonarme Binaların Deprem Güvenliklerinin Artırılması”, ECAS 2002 International Symposium on Structural and Earthquake Engineering, 13-21, O.D.T.Ü., Ankara, 2002.
• Akyüz, U., Tankut, T., Ersoy, U., Özcebe, G., Karadoğan, F., İlki, A., Özden, Ş. ve Baran, M., “Mevcut Hasar Görmemiş Binalar için Güçlendirme Yöntemleri Geliştirilmesi”, TÜBİTAK-Yapı Mekaniği Laboratuvarları Toplantısı I, 39-43, Ankara, 2001.
• Pidaparti,R.M., P.A.Naick, U.Akyuz, ve D.B.Burr, “Fatigue Data Analysis of Dog Femurs in Bending Using Weibull Method”, Proceedings of the 17th Southern Biomedical Engineering Conference, 110, San Antonio, Texas, U.S.A., 1998.
• Akyüz, U. ve A. Ertepınar, “Hiperelastik Malzemeler ve Düzlem Dışı Kesme Davranışının Karşılaştırılması”, Yapı Mekaniği Semineri 94, Dumlupınar Üniversitesi Yayın No.2, 51-62, Kütahya, 1994.
• Akyüz, U. ve A. Ertepınar, “Sıkıştırılabilir Hiperelastik Malzemelerin Elastostatik Davranışlarının Karşılaştırılması”, VIII. Ulusal Mekanik Kongresi, 86-96, Antalya, 1993.

BOOKS

• Akyuz, U., “Alternatif Tasarım Yöntemi: Sismik Temel İzolasyonu”, Binalar için Deprem Mühendisliği Temel İlkeler, ed. E. Canbay, U. Ersoy, G. Özcebe, H. Sucuoğlu ve S.T. Wasti, ISBN: 978-9944-0716-1-1, 2008.
• Ozdemir, G., and Akyuz, U., “Tensile Capacities of CFRP Anchors”, Seismic Assessment and Rehabilitation of Existing Buildings, ed. S.T. Wasti and G. Ozcebe, 2006.
• Ersoy, U., Ozcebe, G., Tankut, T., Akyuz, U., Erduran, E., and Erdem, I., “Strengthening of Infill Walls with CFRP Sheets”, Seismic Assessment and Rehabilitation of Existing Buildings, ed. S.T. Wasti and G. Ozcebe, Vol. IV/29, 305-334, Kluwer Academic Publishers, Netherlands, 2003.
• Erdem, I., Akyuz, U., Ersoy, U., and Ozcebe, G., “A Comparative Study on the Strengthening of RC Frames”, Seismic Assessment and Rehabilitation of Existing Buildings, ed. S.T. Wasti and G. Ozcebe, Vol. IV/29, 407-432, Kluwer Academic Publishers, Netherlands, 2003.