DEVAM EDEN TEZLER
Kaan, F., “Identification and Experimental Modal Analysis of Nonlinear Systems with Internal Resonance”, (Eylül 2022’de başladı – Ortak Danışman: Doç. Dr. B. Özer).
Terzi, M., “An Investigation on Modal Identification of Nonlinear Structures”, (Eylül 2022’de başladı – Ortak Danışman: Doç. Dr. B. Özer).
Ekinci, E. C., “Structural Modification of Nonlinear Systems Using Modal Model”, (Eylül 2020’de başladı – Ortak Danışman: Doç. Dr. B. Özer).
TAMAMLANMIŞ TEZLER
Aydoğan, M. Ö., (Ph. D. Tezi) “Dynamic Modelling and Analysis of Split-Torque Face-Gear Systems”, (Ortak Danışman: Dr. Zihni Burçay Sarıbay), Eylül 2022.
Koyuncu, A., (Ph. D. Tezi) “Design, Modelling and Analysis of a Novel Implantable Bone Conduction Hearing Aid with a Piezoelectric Actuator”, (Ortak Danışman: Doç. Dr. M. Şahin – Uzay ve Havacılık Mühendisliği Bölümü), Eylül 2022.
Karaağaçlı, T., (Ph. D. Tezi) “Nonlinear System Identification and Nonlinear Experimental Modal Analysis by Using Response Controlled Stepped Sine Testing”, Aralık 2020.
Karataş, G., “Suppression of Tool Tip FRF in Machine Tool Assemblies by Component Mode Tuning Method”, (Ortak Danışman: Prof. Dr. E. Budak, Sabancı Üniversitesi), Eylül 2020.
Camcı, M. S., “Modifications in Optomechanical Systems for Vibration Reduction by Using Sequential Model Updating Method“, Temmuz 2020.
Tekin, M., “Dynamic Modeling of Joints in 3D Structural Models”, Kasım 2019.
Bilen, M. E., “Development of A Hybrid Global Optimization Algorithm and Its Application to Helicopter Rotor Structural Optimization”, (Ortak Danışman: Prof. Dr. E. Ciğeroğlu), Haziran 2019.
Öztürk, V. Y., (Ph. D. Tezi) “A Parametric Study on Planetary Gear Dynamics”, (Ortak Danışman: Y. Doç. Dr. E. Ciğeroğlu), Haziran 2018.
Kalaycıoğlu, T., (Ph. D. Tezi) “Investigation of Decoupling Techniques for Linear and Nonlinear Systems”, Mart 2018.
Ferhatoğlu, E., “A New Modal Superposition Method for Nonlinear Vibration Analysis of Structures Using Hybrid Mode Shapes”, (Ortak Danışman: Doç. Dr. E. Ciğeroğlu), Aralık 2017.
Yılmaz, E. E., “Dynamic Modelling in Micromachining”, (Ortak Danışman: Prof. Dr. E. Budak, Sabancı Üniversitesi), Eylül 2015.
Canbaloğlu, G., (Ph. D. Tezi) “Development of a Model Updating Technique for Non-Linear Systems”, Eylül 2015.
Özşahin, O., (Ph. D. Tezi) “Analysis and Modelling of Machine Tool Dynamics and Cutting Stability During Operation”, (Ortak Danışman: Prof. Dr. E. Budak, Sabancı Üniversitesi), Mart 2014.
Gencoğlu, C., “Active Vibration Control of Beams and Cylindrical Structures Using Piezoelectric Patches”, Ocak 2014.
Koyuncu, A., “Identification of Nonlinearities in Structural Dynamics by Using Artificial Neural Networks and Optimization”, (Ortak Danışman: Y. Doç. Dr. E. Ciğeroğlu), Eylül 2013.
Beker, L., “MEMS Piezoelectric Energy Harvester for Cochlear Implant Applications”, (Danışman: Doç. Dr. H. Külah, Elektrik ve Elektronik Mühendisliği Bölümü), Temmuz 2013.
Lüleci, İ. F., “Active Vibration Control of Beam and Plates by Using Piezoelectric Patch Actuators”, Ocak 2013.
Aykan, M., (Ph. D. Tezi) “Identification of Localized Nonlinearity for Dynamic Analysis of Structures”, Ocak 2013.
Karataş, H. Ç., “Possibilistic Interpretation of Mistuning in Bladed Disks by Fuzzy Algebra”, (Ortak Danışman: Y. Doç. Dr. E. Ciğeroğlu), Eylül 2012.
Tol, Ş., “Dynamic Modeling of Structural Joints”, Haziran 2012.
Kalaycıoğlu, T., “Harmonic Response of Large Engineering Structures with Nonlinear Modifications”, Eylül 2011.
Karaağaçlı, T., “Determination of Dynamically Equivalent FE Models of Aircraft Structures by Using Modal Test Data”, (Ortak Danışman Dr. E. N. Yıldız, SAGE), Eylül 2010.
Demirkan, Ö., “The Effects of Structural Modifications on Acoustic Characteristics of Enclosed Bodies”, (Ortak Danışman Prof. Dr. M. Çalışkan), Temmuz 2010.
Yümer, M. E., “On the Non-Linear Vibration and Mistuning Identification of Bladed Disks”, (Ortak Danışman: Y. Doç. Dr. E. Ciğeroğlu), Ocak 2010.
Alan, S. “Development of a Fast Analytical Method for Prediction of Part Dynamics in Machining Stability Analysis”, (Ortak Danışman: Doç. Dr. E. Budak, Sabancı Üniversitesi), Eylül 2009.
Kılıç, Z. M., “Non-linear Dynamic Modeling and Analysis of Spindle-Tool Assemblies in Machining Centers”, (Ortak Danışman: Prof. Dr. Yusuf ALTINTAŞ, University of British Columbia, Canada), Ağustos 2009.
Bediz, B., “Human Tibial Bone Strength Prediction by Vibration Analysis for Diagnosing Progressing Osteoporosis”, (Ortak Danışman: Prof. Dr. Feza Korkusuz), Temmuz 2009.
Canbaloğlu, G., “Structural Modification with Additional Degrees of Freedom in Large Systems”, (Ortak Danışman: Dr. Halidun Fildişi, ASELSAN), Haziran 2009.
Öztürk, M., “Finite Element Structural Modal Updating by Using Experimental Frequency Response Functions”, Mayıs 2009.
Abat, D., “Harmonic Vibration Analysis of Large Structures with Local Nonlinearity”, Şubat 2009.
Avşar, A. L., “Dynamic Modeling and Analysis of Vibration Effects on Performance of Optical Systems”, (Ortak Danışman: Dr. Halidun Fildişi, ASELSAN), Ağustos 2008.
Özşahin, O., “An Investigation on Dynamic Contact Parameters in Machining Center Spindle – Tool Assemblies”, (Ortak Danışman: Doç. Dr. E. Budak, Sabancı Üniversitesi), Ağustos 2008.
Arslan, Ö., “Modal Identification of Non-Linear Substructures and Implementation in Structural Coupling Analysis”, Ağustos 2008.
Orbay, G., “Nonlinear Vibration of Mistuned Bladed Disk Assemblies”, Haziran 2008.
Aytekin, B., “Vibration Analysis of PCBs and Electronic Components”, Nisan 2008.
Atlar, S., “Modeling Part Dynamics in Machining Processes Considering Material Removal”, (Ortak Danışman: Doç. Dr. E. Budak, Sabancı Üniversitesi), Ağustos 2008.
Köksal, S., “Development and Comparative Evaluation of a New Structural Modification Method in Application to Aircraft Structures”, (Ortak Danışman: Dr. M. Cömert), Eylül 2006.
Kozak, M. T. “Investigation of Model Updating Techniques and their Applications to Aircraft Structures”, (Ortak Danışman: Dr. M. Cömert), Eylül 2006.
Büke, F., “An Investigation on the Application of Operational Modal Analysis”, (Ortak Danışman: Dr. M. Cömert), Eylül 2006.
Ertürk, A., “Dynamic Modeling of Spindle-Tool Assemblies in Machining Centers”, (Ortak Danışman: Doç. Dr. E. Budak, Sabancı Üniversitesi), Mayıs 2006.
Gürkan, E., “Nonlinear Mathematical Modeling of Gear Rotor Bearing Systems Including Bearing Clearance”, Aralık 2005.
Aydoğan, M.Ö. “Damage Detection in Structures Using Vibration Measurements”, Aralık 2003.
Ciğeroğlu, E., “Non-linear Vibration Analysis of Bladed Disks with Dry Friction Dampers”, Ağustos 2002.
Yıldız, E.N., “Aeroelastic Analysis of Nonlinear Control Surface”, Aralık 2000.
Cömert, M. D., (Ph. D. Tezi), “Dynamics of Interacting Missile-Launcher Systems with Flexibility”, Eylül 2000.
Sever, İ. A., “Nonlinear Body Bending Aeroelasticiy of Kinetic Energy Projectiles”, Aralık 1999.
Özer, M. B., “A New Method on Identification of Symmetrical Non-Linearities in Structures”, Ağustos 1999.
Doğruer, C. U., “Dynamic Analysis of Spur Gear”, Haziran 1999.
Güler, H. C., (Ph. D. Tezi) “Biomechanical Modeling of Lower Extremity and Simulation of Foot during Gate”, (Ortak Danışman: Prof. Dr. S. Turgut Tümer), Aralık 1998.
Özbek, M., “Computer-Based Teaching Using Hypermedia for the Mechanical Vibrations Course”, Şubat 1996.
Cömert, M. D., “Harmonic Forced Vibration Analysis of Assembled Structures with Non-Linear Coupling”, Eylül 1994.
Maliha, R. M., (Ph.D.), “Non-Linear Dynamic Analysis of Rotors to Internal Excitation by Using Describing Functions and Finite Methods”, Ağustos 1994.
Şardağı, Y., “Flexible Rotor Balancing by the Influence Coefficient Method”, (Ortak danışman: Prof. Dr. G. Aksu), Şubat 1994.
Okan, S. T., “Dynamic Analysis of Mult-Stage Helical Geared Rotors with Transfer Matrix Method”, Şubat 1994.
Tahtalı, M., “Vibration Analysis of Damped Structures and Structural Reanalysis Using a New Structural Modification Method”,Ocak 1993.
Kuran, B., “Dynamic Analysis of Harmonically Excited Non-linear Structures by Using Iterative Modal Method”, Ağustos 1992.
Kesan, M., “Modeling and Analysis of Spur and Helical Gears on Flexible Rotors”, Ocak 1992.
Güler, H. C., “Biomechanical Simulation of Human Impact Landing Using an Open Linkage Dynamic Model”, Ocak 1992.
Yılmaz, D., “Dynamic Modelling and Analysis of Multi-Geared Rotors Including Lateral Torsional Vibration Coupling”, Ağustos 1991.
Yalçıntaş, M., “Fault Diagnosis of Gears by Computer Simulation” Ağustos 1990.
Tanrıkulu, Ö., “Identification of Nonlinearities in Vibrating Structures”, (Eylül 1989 – Eylül 1990). (İngiltere’de Imperial College’de tezini tamamladı).
Şener, Ö. Sedat, “Dynamic Analysis of Geared Shaft Systems by Using Continuous System Models”, Temmuz 1989.
Budak, E., “Dynamic Analysis of Nonlinear Structures for Harmonic Excitation”, Temmuz 1989.
Çetinkaya, N., “Vibration Analysis of Structures Using Substructure Synthesis”, (Ortak danışman: Doç. Dr. M. Çalışkan), Şubat 1989.
Kahraman, A., “Geared Rotor Dynamics”,(Ortak Danışman olarak; Tezini Prof. R. Singh ile tamamladı).
Eşkinat, E., “Vibration Analysis of Large Structures by Finite Element Method and Substructure Synthesis Technique”, Mart 1985.
Çandır, B., “Optimum Dynamic Vibration Absorbers for Beams”, Mart 1985.
Bakiler, T. C., “Experimental Determination of Complex Modulus of Elasticity of Viscoelastic Materials”, Eylül 1984.
Karacaer, V., “Design and Construction of a Vibratory Table”, Mayıs 1984.
Yaman, Y., “Modal Identification of Structurally Damped Mechanical Structures”, Şubat 1984.
Erdaş, G., “Free Vibration Analysis of Beams and Plates Using Finite Element Method”, Ekim 1983.
Korkusuz, E., “Motion Analysis of a Particle on Vibratory Conveyors”, Temmuz 1983.
Özkan, Z. L., “Whirling Speeds and Unbalance Responses of Rotating Shafts Using Finite Element Methods”, Ocak 1983.
Semercigil, S. E., “Dynamic Response of Large Order Damped Linear Mechanical Systems by Modal Analysis”, Ağustos 1982.
Demirer, E. S., “Free and Forced Vibration Analysis of Beams Carrying Discrete Masses”, Haziran 1982.
Botsalı, F. M., “Free and Forced Vibrations of Continuous Beams on Elastic Supports by Modal Analysis”, Şubat 1982.